Kernel_DATA_INPAGE_ERROR

[simmyjiff]

Thanks for reviewing my problem. I'm not absolutely sure what caused this problem, but my FSX was booting and the Blue screen suddenly appeared.
I have 2 system drives, dual booted, 1 for day to day work, (windows 10) and the other windows 7 for my FSX installation, this probably occurred on this drive. (see below for details of setup) The drive closed down within minutes and I switched on and booted windows 10 to try and sort the problem out, after reading the the Sevenforums posts, I returned to the windows 7 boot up and was advise with the normal black screen informing me that the drive had not closed down properly and how did I want to start, ie Normally or in Safe Mode, I chose normally and here we are seemingly with no long term problems. i have read in the Forums that, sometimes, running the Data collector works, I hope so! the fill is attached, and thanks for your help, please advise if you need any further info.
Thanks
Jim

PC setup
CPU: Intel Core i5 3570K (Ivy Bridge)-(Platform LGA 1155 [Socket H2])
CPU Cooler: Xigmatek Loki SDS963
Mobo: Asus P8Z77-V LX2
RAM: 8GB Corsair 1600mhz Vengeance (2x4GB)
Hard Drive: 500GB S-ATAIII 6.0Gb/s
Graphics: NVIDIA GeForce GTX 650 Ti 1GB
Sound: Onboard 7.1 Audio
Case: Xigmatek Asgard 382 Window
PSU: 450W Corsair VS

 

[axe0]

Diagnostics Test

 HDD TEST

   Note

Please run HDTune first, in the order posted!

Run HDTune to

• check the health,
• scan for errors, no quick scan but full scan
• run a benchmark.

It may take some time, but please take the time you need to perform it properly.
When above is done please make screenshots of the following

• the health,
• the error scan,
• the benchmark incl. following
  • transfer rate,
  • access time,
  • burst rate,
  • cpu usage.

Run SeaTools DOS to check the integrity of your HDD. SeaTools for DOS and Windows - How to Use - Windows 7 Help Forums
Run the long test.

   Note

Do not run SeaTools on an SSD as the results will be invalid.

Make a photo of the result and post it.

Run chkdsk
Disk Check - Windows 7 Help Forums
Use option TWO with parameter /r
Upload the chkdsk log :ar: Check Disk (chkdsk) - Read Event Viewer Log - Windows 7 Help Forums

 

[simmyjiff]

Hi, and thanks for your comments,
HD Tune completed, screen shots as requested attached.
SeaTools run, but message ' Drive not Found' received?
CHKDSK Run, text report attached.

 

[axe0]

Which drive isn't being detected?

Please don't forget to run all tests in each drive/partition, not only the OS partition/drive.

 

[simmyjiff]

Kernel_data_inpage_error

Hi,
None, Downloaded Seatools, saved to disc, Changed boot priority and fired up, opening screen, no drive found, will try again tonight.
Sorry, thought you meant to the system drive I was having a problem with?, again I'll go through it again tonight.
Thanks
Jim

 

[axe0]

You'd be surprised how many times it isn't the system drive causing the issue, which is why it is best to check all drives

 

[simmyjiff]

Hello again, That's fine!
Sorry I've been so long, I have been carrying out the HD Tune tests again to ALL of my Drives, but still a problem with Seatools Dos? Downloaded a new copy last night, saved to disc, change boot sequence, Opening screen....
NOTHING IN DRIVE LIST

'SELECTED DRIVE INFORMATION'
No hard Drives found.
If you believe this to be incorrect, check cables, drive power connection, jumper settings and then try again.#

Clearly all drives are working satisfactorily, well, apart from my BSOD, and have been for the last year or so? not sure what's happening.

 

[axe0]

Alright, alternatively you could run the Windows version of SeaTools

 

[simmyjiff]

Kernel_data_inpage_error

Hello again, sorry, Easter got in the way, information as requested in the attached file, if I can help with anything else please let me know, can I also clarify the following for your info.
1. I have 3 HD's 2 OS Win 7 and Win 10, dual booted and one storage drive, the drive I seem to be having a problem with is the Win 7 drive, it never happens when I'm in Win 10.
2. The issue has happened a couple of times now since my original post, the first just after the 1st post and again twice today, it is always with the Win 7 Drive, although I accept your point that it might be something else triggering it?
3. When it does occur, I close down the PC and reboot in Win 10 drive, no problem there, the Win 7 drive reboots in the normal way too, as if it resets itself?
4. The problem appears always to occur when I am loading the FSX program or mid flight, presumably when the Drive is working the hardest?
5. I am not a 'tecchy' in any way, shape or form, but the results of the tests appear satisfactory, I await eagerly for your interpretation.
Regards
Jim
The Seatool logs are attached to this post the HDTune in the next.

 

[simmyjiff]

HDTune logs attached

 

[axe0]

Hi simmyjiff,

Is it correct that you ran the Short Drive Self Test?
If so, run the long test in SeaTools instead as requested

As mentioned, don't forget to run the tests on all partitions/drives

 

[simmyjiff]

I ran the Short test, because that was what Sea tools recommended, I'll come back to you....

 

[simmyjiff]

Long test data attached as requested....

 

[axe0]

Good to see, have you had any BSODs since starting the thread?

 

[simmyjiff]

Well, I was hoping to say this morning that all seemed to be ok, to answer your question first though, yes, I had one just after the first post then another just before I carried out the long test with Seatools. All seemed to be working well, in fact the PC was working smoother and quicker after I had started the testing. This morning however i suffered another BSOD, but this was a different one. I booted the PC early this morning and commenced Re-programming my X-55 Rhino with FSX, I left the PC on for a while, everything was fine, when I came back it was working very slowly, in fact the mouse was uncontrollable? I opened Task Manager and noted that the Rhino Profiler 'process' was using 100% cpu and the Kaspersky 70%, I started shutting down and in seconds the BSOD appeared, it was a different screen than previous, It was only open momentarily so I couldn't record the error numbers at the bottom. I restarted the PC in Safe mode and made screen print of the problem, this is attached, I pressed 'check for search for a solution but nothing came up.
I rebooted the PC in Normal Mode successfully, the Task Manager was showing the CPU as running at between 0 and 2%, this was on the Win 7 sys drive BTW.
I appreciate your assistance, please let me know if you need any other info.
Jim

 

[axe0]

What I'll need is info from the DM Log Collector

 

[simmyjiff]

Can you direct me to a Download site, just googled and apparently the software is not available from MS now?

 

[simmyjiff]

Hi, Sorry, just experienced another blue screen, different one again? screen prints attached
Jim

 

[simmyjiff]

- Kernel_DATA_INPAGE_ERROR

Is this the info you're asking for?

 

[axe0]

   Warning

Programs that claim to update your drivers install either the wrong or corrupted drivers.
If you have installed any driver with Driver Booster 4 and DriverTuner, please remove them as it may cause trouble.

An easy way to get remove these drivers is by using a restore point prior the installation.