Major BSOD Issues

[Ibebryan]

Hi, I have had my computer for about 2 years now. i built it myself and believe i did a pretty good job! but for awhile now i have been having BSOD issues sometime frequently and sometimes once every 2 weeks. i have had all kind of BSOD errors such 0x01e, 0x0A, 0x0e, 0x03b and 0x0c5. Recently it has been very bad and they are happening more often (3 to 5 times a day). i have tried reseeding all my parts. i have updated most of my drivers or have tried to. so if anybody can help that would be great! i have linked my dump file below

 

[YoYo155]

The bugchecks you're experiencing are not demonstrating any
definite probability but do demonstrate a pattern of possible infection and RAM issues.

• Download Speccy and upload a Screenshot of the summary tab.
• Download TDSS-Killer and scan for rootkits.
• Download Windows Defender Offline and scan for other types of infections.

Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.

If memtest comes free from errors, enable Driver Verifier to monitor the drivers.
Driver Verifier - Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.

   Information

Why Driver Verifier:
It puts a stress on the drivers, ans so it makes the unstable drivers crash. Hopefully the driver that crashes is recorded in the memory dump.

How Can we know that DV is enabled:
It will make the system bit of slow, laggy.

   Warning

Before enabling DV, make it sure that you have earlier System restore points made in your computer. You can check it easily by using CCleaner looking at Tools > System Restore.

If there is no points, make a System Restore Point manually before enabling DV.

   Tip

• If you fail to get on the Desktop because of DV, Boot into Advanced Boot Options > Safe mode. Disable DV there. Now boot normally again, and try following the instruction of enabling DV again.
• If you cannot boot in Safe mode too, do a System Restore to a point you made earlier.

When you're done with testing your RAM upload a picture.
If any crashes occurred run a new instance of SFDT and upload the .zip it generates.

Post back with the results .