Many BSOD's and very bad MemTest Results

[Brunan]

Hi all, I'm after experiencing an onslaught of BSOD's today, each with a different error code.
Also, After doing a MemTest, on the first Pass, It counted up a total of 200'000+ errors
I restarted the Memtest after getting over 200'000 errors (it tending to go on and on and on . . .), and on the first pass it read up no errors.
I am heavily confused and worried, can anyone give me some help on the matter?
Attached is the Windows 7 Diagnostic folder.
Thanks!

 

[x BlueRobot]

You clearly must have RAM or motherboard problems, follow these steps:

• http://www.sevenforums.com/tutorials/105647-ram-test-memtest86.html

Run Memtest86+ for least 7-8 passes, and preferably overnight as it can take a while to fully complete.

Test each RAM stick individually, if an error is found then move the same RAM stick into the next DIMM slot and test again, if errors are found for the same RAM stick in every available slot then you have a faulty RAM module. On the other hand, if no errors are found in the next slot or the other slots for the same RAM module, then you have a faulty DIMM slot.

Test each RAM stick and every motherboard DIMM slot available.

test|Slot1|Slot2
RAM1| Error | Error
RAM2|Good|Good

It is a RAM, a bad RAM.

But if you have got a result like that:

test|Slot1|Slot2
RAM1| Error |Good
RAM2| Error |Good

It is a motherboard issue. The particular slot is bad.