Solved Many BSODs while doing anything!

[Orbitall]

---------------------------------------PROBLEM-----------------------------------------------
Hi!
Iv had my rig running fine for 2months+ no BSOD! Then this morning when Coding/Browsing/Music i get
BSOD: Driver power failure!

-Shrug off, restart and login. After login then
BSOD: Bad Pool Header!

-Restart and login safemode+networking. Runs ok for 5min then
BSOD:Bad pool header. or
BSOD: Driver power failure!

-Restart and login safemode(minimal). Runs ok, then try to recover/rollback to 1month ago. 20min of windows shutting down.

-Device Manager-Disabled tsuedo tuneling, Hamachi and Daemon tools devices (mite have been issue).

-Turn off pagefile to OS-SSD, so use RAM instead (mite have been issue, and have run old ssd 100% for 1 year+ using this).

-When restarting or shutting down
BSOD: pagefault in non paged area. or
BSOD:Bad pool header.

Note: Unable to run any program without BSOD first, so unable to use sevenforum diagnostic tool!


-----------------------------------FAULT_FINDING-------------------------------------------

SUSPECT: RAM become corrupted unstable, or Windows 7 install corrupted.

TO DO:
-Will try to repair windows start up, but windows starts up fine, just everything else which is issue!
-Will run memtestx86 if dumps point to memory issue.

PROBLEM: System is unstable and BSODs on anything and everything, help i'm scared!

-whats causing the BSOD?
-how can i fix this?

 

[Dsprague]

It seems your BSOD is being caused by two drivers,
Your 82579V Gigabit Network Connection driver:

*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 19, {20, fffffa8011c9c380, fffffa8011c9c4a0, 412000c}

*** WARNING: Unable to verify timestamp for e1c62x64.sys
*** ERROR: Module load completed but symbols could not be loaded for e1c62x64.sys
Probably caused by : e1c62x64.sys ( e1c62x64+1fb23 )

Followup: MachineOwner
---------

Driver Reference Table - e1c62x64.sys
Please update the driver from here: Intel Download Center

and by your ASmedia USB 3.0 Hub driver

*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 9F, {3, fffffa8012b0dcd0, fffff80001bba3d8, fffffa8012b1f010}

*** WARNING: Unable to verify timestamp for asmthub3.sys
*** ERROR: Module load completed but symbols could not be loaded for asmthub3.sys
Probably caused by : asmthub3.sys

Followup: MachineOwner
---------

Driver Reference Table - asmthub3.sys

Please update the driver from here: ASMedia Technology Inc. ????

 

[Orbitall]

SOLVED: Cheers Dsprague...u helped alot!

Managed to solve although the official intel site doesnt have 82579V drivers listed only 82579 so got recent LAN drivers from ASUS board site. Asmedia link didn't help because doesn't display hardware number on driver management, but found this:
http://http://rog.asus.com/forum/sh...roller-Firmware-XHCI-Controller-Driver-Update
....which helped resolve issue and get updated drivers not listed on ASUS board site.

 

[Dsprague]

Glad to hear that things worked out.