More BSOD's after hoping problem was resolved

[jamie22s]

Hi guys.

I've got some more BSOD's today after booting up again. I'm going to start crying soon.
Had a whole day with no problems after some great help from CarlTR6 and Capt.Jack in this thread:
http://www.sevenforums.com/crashes-...verifier-detected-violation-ntoskrnl-exe.html
I had a good session on Flight Simulator X, with no problems at all, it ran like a dream.
But today, i'm back to a Blue Screen party!
I managed to get into windows in safe mode, and have zipped the latest minidumps below. I couldn't do any more I'm afraid. Safe mode is still running but it is very slow, and my CPU usage is showing as 100%.
Could someone have a look at the dump files and advise please. I'm losing the will to live here!
Thanks in advance,
Jamie

 

[CarlTR6]

James, I am sorry to hear this. Please run the info tool from this thread again so that we have your system info.

http://www.sevenforums.com/crashes-debugging/96879-blue-screen-death-bsod-posting-instructions.html

 

[jamie22s]

Hi Carl,
I'll have to try it tomorrow, as I'm off out in a bit. Will run the info tool in the morning and post updated zip file.
Thanks again.
J

 

[CarlTR6]

We will be waiting.

 

[jamie22s]

Hello guys!
Right, I've managed to get run the full whack, as per the BSOD posting instructions! I crashed once today with a memory management BSOD but then was able to get into windows normally after.
Also, I ran memtest86 again yesterday on each stick seperately and both together. Each time going for at least 2 passes. All passed with no errors. Just thought I'd do it to be safe!
I have dismantled everything and checked and rechecked all connections, just to be safe, and everything seemed ok. I now have no fans running as I do believe even the one plugged into the motherboard was causing a problem.
Could someone have a look and let me know what you think please?
Sorry for the late post, it was a heavy night last night, and "morning" was "afternoon" by the time I got out of bed!
Thanks again!
Jamie

 

[CarlTR6]

You need to run Memtest for at least 7 passes; many times errors will not show up with only three passes. I also suggest you run Prime95 following the instructions in this tutorial: http://www.sevenforums.com/tutorials/100352-cpu-stress-test-prime95.html

Run 3 separate tests, one on each of the settings (Blend, Small FFTs, Large FFTs).

Error code 1A (3X), MEMORY_MANAGEMENT - Usual causes: Device driver, memory, kernel

Error code 19, BAD_POOL_HEADER - Usual causes: Device driver

Error code 7A, KERNEL_DATA_INPAGE_ERROR - Usual causes: Memory, Paging file corruption, File system, Hard drive, Cabling, Virus infection, Improperly seated cards, BIOS, Bad motherboard, Missing Service Pack

Update this driver:

netr28ux.sys Mon May 25 00:38:17 2009 - Ralink RT2860 series Wireless LAN Card (you may have a different manufacturer)Ralink corp.

This may be part of the problem.

Check each cable and electrical connection. Update your wireless driver or upgrade your wireless adapter. Reboot and see how your system does. If you get another BSOD, run Memtest and run Prime. If everything passes in Memtest and Prime, enable Driver Verifier following the instructions in this tutorial: Driver Verifier - Enable and Disable. Upload any and all Driver Verifier enabled dumps.

Please keep us posted.