Solved Multiple BSOD while Welcome Screen.

[Thana]

My System throws random BSODs at me while Starting up and only then...
The Problem occures while Booting and waking from Hibernate or Standby
If i get past the Welcome Screen everything seems to run just fine.
I already tried CHKDSK /f /r and the Windows build-in RAM-diag tool and Memtest (only of the running system so far)... No error Detected (but not too sure about the RAM-part).


Any help would be greatly appreciated,
Ben

 

[koolkat77]

Test and Diagnose RAM Issues with Memtest86+:

RAM - Test with Memtest86+​

   Tip

• :info: Pay close attention to part 3 of the tutorial "If you have errors"
• :tip: Test the RAM with Memtest86+ for at least 7-10 passes. It may take up to 22 passes to find problems. Make sure to run it once after the system has been on for a few hours and is warm, and then also run it again when the system has been off for a few hours and is cold.

Upload a screenshot using:

CrystalDiskInfo​

:tip: For how to upload a screenshot or file, read here

Test your Hard Drive by running:

Hard Drive Diagnostic Procedure​

 

[Thana]

Thanks, since the System is cooled down and the the BSOD occurs alsways right after booting when the system is cold i'll start with a cold Memtest86. Results in a few hours!

Thanks for the quick reply!

 

[Thana]

Test and Diagnose RAM Issues with Memtest86+:

RAM - Test with Memtest86+​

   Tip

• :info: Pay close attention to part 3 of the tutorial "If you have errors"
• :tip: Test the RAM with Memtest86+ for at least 7-10 passes. It may take up to 22 passes to find problems. Make sure to run it once after the system has been on for a few hours and is warm, and then also run it again when the system has been off for a few hours and is cold.

This seems to have found the Problem the RAM produces a massive massive error count when cold, but none when its warm.
Since there is only one RAM slot in this ultrabook i need too wait for a working bar off DDR3 SO-DIMM to verify if its the memory or the mainboard slot. Next update then!


thanks, Ben

 

[koolkat77]

Thanks for the update.
Good luck!