*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck D1, {fffff08008057bf0, 2, 0, fffff8800fd5ff6a}
Unable to load image \SystemRoot\system32\DRIVERS\usbehci.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for usbehci.sys
*** ERROR: Module load completed but symbols could not be loaded for usbehci.sys
Probably caused by : usbehci.sys ( usbehci+4f6a )
DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If kernel debugger is available get stack backtrace.
Arguments:
Arg1: fffff08008057bf0, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, value 0 = read operation, 1 = write operation
Arg4: fffff8800fd5ff6a, address which referenced memory
Debugging Details:
------------------
READ_ADDRESS: GetPointerFromAddress: unable to read from fffff80002ec90e8
fffff08008057bf0
CURRENT_IRQL: 2
FAULTING_IP:
usbehci+4f6a
fffff880`0fd5ff6a 498b5b30 mov rbx,qword ptr [r11+30h]
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0xD1
PROCESS_NAME: System
TRAP_FRAME: fffff800040548f0 -- (.trap 0xfffff800040548f0)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=0000000000000000 rbx=0000000000000000 rcx=fffffa8005661800
rdx=000000004f444648 rsi=0000000000000000 rdi=0000000000000000
rip=fffff8800fd5ff6a rsp=fffff80004054a80 rbp=fffffa80056546a0
r8=000000004f444648 r9=0000000000000000 r10=0bad00000bad0000
r11=fffff08008057bc0 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up ei pl nz na pe nc
usbehci+0x4f6a:
fffff880`0fd5ff6a 498b5b30 mov rbx,qword ptr [r11+30h] ds:2c20:fffff080`08057bf0=????????????????
Resetting default scope
LAST_CONTROL_TRANSFER: from fffff80002c97be9 to fffff80002c98640
STACK_TEXT:
fffff800`040547a8 fffff800`02c97be9 : 00000000`0000000a fffff080`08057bf0 00000000`00000002 00000000`00000000 : nt!KeBugCheckEx
fffff800`040547b0 fffff800`02c96860 : fffffa80`05663d20 fffff880`03a585c2 fffffa80`06a4a860 fffffa80`071c7b88 : nt!KiBugCheckDispatch+0x69
fffff800`040548f0 fffff880`0fd5ff6a : fffffa80`071c7b88 fffff880`04003100 fffffa80`05d34d58 fffff880`0fd608da : nt!KiPageFault+0x260
fffff800`04054a80 fffffa80`071c7b88 : fffff880`04003100 fffffa80`05d34d58 fffff880`0fd608da 00000000`00000000 : usbehci+0x4f6a
fffff800`04054a88 fffff880`04003100 : fffffa80`05d34d58 fffff880`0fd608da 00000000`00000000 00000000`00000000 : 0xfffffa80`071c7b88
fffff800`04054a90 fffffa80`05d34d58 : fffff880`0fd608da 00000000`00000000 00000000`00000000 00000000`00000000 : 0xfffff880`04003100
fffff800`04054a98 fffff880`0fd608da : 00000000`00000000 00000000`00000000 00000000`00000000 fffffa80`05d34c50 : 0xfffffa80`05d34d58
fffff800`04054aa0 00000000`00000000 : 00000000`00000000 00000000`00000000 fffffa80`05d34c50 00000000`ffffffff : usbehci+0x58da
STACK_COMMAND: kb
FOLLOWUP_IP:
usbehci+4f6a
fffff880`0fd5ff6a 498b5b30 mov rbx,qword ptr [r11+30h]
SYMBOL_STACK_INDEX: 3
SYMBOL_NAME: usbehci+4f6a
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: usbehci
IMAGE_NAME: usbehci.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 4ae28235
FAILURE_BUCKET_ID: X64_0xD1_usbehci+4f6a
BUCKET_ID: X64_0xD1_usbehci+4f6a
Followup: MachineOwner
---------