Need help pleaseee!!!

[TonyJ]

Hi, i have a COMPAQ CQ60-413NR NoteBook it came Factory installed with windows Vista, i upgraded to windows 7 but i would like to go back to windows xp but when i try to boot from my xp disk it shows the "Press Any Key To Boot From CD or DVD" after i press a key i get nothing but a black screen... i talked with HP support and they told me to install a SATA driver before i could install XP i made a XP ISO with the SATA drivers in it but i get the same problem.. i dont know if its a Video driver or what but windows vista and windows 7 both load fine... if you could help me to get windows xp on my laptop i would realllllly appreciate it alot.

 

[frantic912]

try seacrh n check on your BIOS either AHCI is enabled or not...XP doesn't support AHCI

 

[Tews]

Hi Tony, welcome to Seven Forums... If you want to install xp, you really want to format your drive before attempting the install... You can download Killdisk to do this.. Then you want to look at this tutorial to make sure that you have properly slipstreamed your SATA drivers .... How to Slipstream SATA drivers into Windows XP setup CD Let us know if you need more help..

 

[TonyJ]

try seacrh n check on your BIOS either AHCI is enabled or not...XP doesn't support AHCI

how can i do this? i searched threw my BIOS and i cannot find it?

 

[TonyJ]

Hi Tony, welcome to Seven Forums... If you want to install xp, you really want to format your drive before attempting the install... You can download Killdisk to do this.. Then you want to look at this tutorial to make sure that you have properly slipstreamed your SATA drivers .... How to Slipstream SATA drivers into Windows XP setup CD Let us know if you need more help..

ive had this problem since i got this laptop and my friend and i tryed killdisk on it and its not the HDD and thats the tut i followed to make my xp ISO with the sata drivers... thought that was the prob but it wasnt

 

[Tews]

Have you updated your BIOS?? The latest version is dated 5/28/2010 ... Download

 

[TonyJ]

Have you updated your BIOS?? The latest version is dated 5/28/2010 ... Download

yes i just updated to BIOS version F.63 A a couple days ago.. but there is no such option to disable AHCI or SATA support in my BIOS.. how else could i disable it?

 

[TonyJ]

I talked with another HP tech and this is what they say...

[Tuesday, July 27, 2010 6:25 AM] -- Durga Rao M says:
Tony, for few models, there will not be an option to disable the SATA in the BIOS.

[Tuesday, July 27, 2010 6:25 AM] -- Tony Hunt says:
i know thats why i need another way to disable it

[Tuesday, July 27, 2010 6:26 AM] -- Durga Rao M says:
So, now in order to install the XP operating system, we need to download and install the ICH 9 SATA drivers.


but i need to be able to see my installation screen to be able to install these drivers correct? i get nothing but a black screen... tested all of my hardware everything seems to be fine... its driving me crazy ive tryed everything i can think of. there support doesnt know what to tell me exept "we recommend you reinstall the vista OS".

 

[pat247]

Windows 7 makes a 100 MB partition on the hard drive for system files and I suspect this is what is preventing the install of xp. I recomend using the Win 7 Installation disc to remove the 100 MB partition and any other partitions for that matter and make the entire drive unallocated space. To do this boot from the Win 7 install disc and choose custom install, when you see the drives, choose "drive options" and delete each partition on the drive until it all shows as unallowcated space, do "not" create new partitions or format the drive. At this point you are done simply abort the install by closing the windows using the "x" in the upper right hand corner. Windows will ask if you are sure you want to quit, click yes. Replace the win 7 disc with the xp disc and reboot.

 

[mimrah]

No I'm not gonna convince you to stick with vista but, why do you want to use XP?

On my old laptop, the same thing happened and I was unable to install windows XP

 

[frantic912]

try seacrh n check on your BIOS either AHCI is enabled or not...XP doesn't support AHCI

how can i do this? i searched threw my BIOS and i cannot find it?

i think in same category on setting time n date....
it had option to choose either AHCI or IDE

try choose IDE

 

[TonyJ]

try seacrh n check on your BIOS either AHCI is enabled or not...XP doesn't support AHCI

how can i do this? i searched threw my BIOS and i cannot find it?

i think in same category on setting time n date....
it had option to choose either AHCI or IDE

try choose IDE

frantic912 do you have a number i could get ahold of you by or a instant messenger? so i can like explain every detail to you?

 

[TonyJ]

it is not my Hard drive causing it... ive actually unhooked my hard drive and tryed to run xp installation and i just get black screen after i press any key to boot from cd... i talked with HP support and they told me its my SATA drivers if i cannot disable my AHCI i would need to install the SATA drivers but in order to do this i would need for the windows xp installation screen to show up correct?

 

[TonyJ]

No I'm not gonna convince you to stick with vista but, why do you want to use XP?

On my old laptop, the same thing happened and I was unable to install windows XP

Well, Windows Vista/Windows 7 are memory hogs to me and i use C++ and other programming languages and everything just runs alot smoother and faster with windows Xp. they it IS possible to install xp on my model notebook but im having no luck at all with it i get nothing but a black screen after i press a key to boot from cd it doesnt show the windows xp installation at all to even install SATA or Raid drivers

 

[TonyJ]

im wondering if the AHCI is the problem because if it was wouldnt i still get the Installation screen for windows xp right?

 

[TVeblen]

Hi

I had this exact problem using a W7 DVD. I [FONT=&quot]install the DVD in drive and re-start, and the boot loader will stall at "CD Boot Device....Ready__",

Now just hit the RESET button on the computer case to hard re-boot.
Now it will progress to "Press Any Key to Boot From CD".
Don't ask me why this works.


[/FONT]

 

[TonyJ]

Hi

I had this exact problem using a W7 DVD. I [FONT=&quot]install the DVD in drive and re-start, and the boot loader will stall at "CD Boot Device....Ready__",

Now just hit the RESET button on the computer case to hard re-boot.
Now it will progress to "Press Any Key to Boot From CD".
Don't ask me why this works.


[/FONT]

i dont have a reset button its a cq60-413nr notebook

 

[TVeblen]

Bummer.
I do think you are dealing with a problem on the boot-media end, still. The DVD should run the setup program to a point, before you need to load SATA drivers. If you are getting nothing then I think you are having the same problem I was having - the boot loader was not initiating.

If the setup program does run ("Loading Files..., etc") and then craps out afterward that would be something different.

 

[TonyJ]

Bummer.
I do think you are dealing with a problem on the boot-media end, still. The DVD should run the setup program to a point, before you need to load SATA drivers. If you are getting nothing then I think you are having the same problem I was having - the boot loader was not initiating.

If the setup program does run ("Loading Files..., etc") and then craps out afterward that would be something different.

Yea its weird i don't know what to do with it it has me puzzled ... do you have an instant messenger i could message you on?

 

[TonyJ]

I FIXED IT!!!!!!!! Thank's for all the help guys... i added more SATA drivers to a XP ISO using nLite and its working now.