Need help with BSOD - WIN 7 @ 64

[BogdanX]

Hello all,
I'm new to this forum and I'm looking for some help with my BSOD problems.
So I got a new pc like a few months back and all is a-ok but when I play CS 1.6 on WIN 7 64 bits after I exit the game in like 50% of the times I get a BSOD. Now I just ignored it for some time but eventually the errors finally made my WIN not load up anymore and I had to re-instal my operating system once again.
So now when all my friends are going CS 1.6 I'm staying away because I'm always gambling with a 50% 50% chance of a BSOD for when I'm exiting the game.. and if I stack them to much the operating system will fail on me once again and need me to format and re-instal etc etc..

(Side Note* I also noticed after the BSOD's and WIN failed that the vents or something in my pc's are going into overdrive mode.. making a bigger noise then usual.)

I will put my minidump rar up and my system specs should be in my register form, let me know if you guys need anything more from me and I will be happy to assist you with it.
Thank you in advance for any kind of help you guys can provide.

 

[zigzag3143]

Hello all,
I'm new to this forum and I'm looking for some help with my BSOD problems.
So I got a new pc like a few months back and all is a-ok but when I play CS 1.6 on WIN 7 64 bits after I exit the game in like 50% of the times I get a BSOD. Now I just ignored it for some time but eventually the errors finally made my WIN not load up anymore and I had to re-instal my operating system once again.
So now when all my friends are going CS 1.6 I'm staying away because I'm always gambling with a 50% 50% chance of a BSOD for when I'm exiting the game.. and if I stack them to much the operating system will fail on me once again and need me to format and re-instal etc etc..

(Side Note* I also noticed after the BSOD's and WIN failed that the vents or something in my pc's are going into overdrive mode.. making a bigger noise then usual.)

I will put my minidump rar up and my system specs should be in my register form, let me know if you guys need anything more from me and I will be happy to assist you with it.
Thank you in advance for any kind of help you guys can provide.

These crashes were caused by memory corruption (probably a driver). Please run these two tests to verify your memory and find which driver is causing the problem.

If you are overclocking anything reset to default before running these tests.
In other words STOP!!!


1-Memtest.

*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

Any errors are indicative of a memory problem.

If a known good stick fails in a motherboard slot it is probably the slot.

http://www.sevenforums.com/tutorials/105647-ram-test-memtest86.html



2-Driver verifier

I'd suggest that you first backup your data and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.

http://www.sevenforums.com/tutorials/101379-driver-verifier-enable-disable.html


Further Reading
Using Driver Verifier to identify issues with Windows drivers for advanced users

ALSO

I would run the update readiness tool and update to SP-1

Please run the update readiness tool and then update to SP-1


Ensure you install the correct 64 or 32 bit option for your system)
Download the System Update Readiness Tool (64bit)
Download the System Update Readiness Tool (32bit)