New BSOD 0x0000007a, no mini dump

[Ryan Bodker]

A few days ago I began getting BSODs. I have have been trying to get my pc to save the minidumps to no avail. However I did stop it from restarting automatically so I could write down the information.

Kernel Data Inpage Error
0x0000007a (0x00000020, 0xc000009d, 0x96D0A70C, 0x0000000)




Initially I thought it was because of a new graphics card driver that I had installed but I did a complete windows install and after it was finished I logged into windows and I got another BSOD. I overclocked my PC about a week ago but had no issues for a week. I decided to set my bios to default settings anyways. I have a feeling it might be somehow related to my crucial m4 SSD bootdrive. I tried updating the firmware but it said it was up to date, when i tried to force it to update anyways it said that no eligible drive was found. Any help would be appreciated.

- System

- Provider

[ Name] Microsoft-Windows-Kernel-Power
[ Guid] {331C3B3A-2005-44C2-AC5E-77220C37D6B4}

EventID 41

Version 2

Level 1

Task 63

Opcode 0

Keywords 0x8000000000000002

- TimeCreated

[ SystemTime] 2013-07-07T02:07:39.351608500Z

EventRecordID 2013

Correlation

- Execution

[ ProcessID] 4
[ ThreadID] 8

Channel System

Computer Ryan-PC

- Security

[ UserID] S-1-5-18


- EventData

BugcheckCode 0
BugcheckParameter1 0x0
BugcheckParameter2 0x0
BugcheckParameter3 0x0
BugcheckParameter4 0x0
SleepInProgress false
PowerButtonTimestamp 0

 

[essenbe]

Hello Ryan and welcome to the forums. Have you updated the firmware on your Crucial M4? The latest firmware is 070H and can be downloaded from Crucial's site. Due to the fact your SSD is your boot drive, you will need to download the third one, the bootable version. I believe it is an .ISO file and you will need to burn it to a CD and boot from the CD. The instructions are there too. Let us know how it goes and if you need any further help with the update.

 

[Ryan Bodker]

chkdsk completed with no errors, tried to install new firmware for crucial m4 but it says "no eligible drives found".

 

[Ryan Bodker]

tuns out ive had my SSD plugged into the marvel controller (blue) I believe instead of the intel sata ports (grey) as soon as I switched those the bios recognized the drive and i was able to update the firmware. I also ran a memtest on the gpu which came back clean. Still need to run memtest for the ram to see how that comes back. I'm going to log into arma 3 and play for a little bit to see if i can duplicate the crash after updating the SSD firmware.

 

[essenbe]

Marvel controllers have a history of having problems with SSDs. They don't get along well together for some reason. That could be part of your problem, buy I would still run memtest for a full 8 passes.