Numark IASO Driver Issues

[dsanchez11]

Hello Friends, i have a W7 Ultimate SP1 32 bit. i recently purchase IASO Driver and Sound Card from Numark.com . I tried installing the driver its installs properly but when ask to reboot the system i come across the fact the driver works properly but no sound is coming out of the sound card. The only sound that comes out of it are ticks. about less than the average samples. I also installed using XP SP3 and it work. But i now want it to my Build W7 Ultimate SP1 32bit


Any Help out there is really appreciated .... Thanks for taking a look at my post.

 

[fireberd]

I see you have both the Numark and the AMD High Definition Audio Device listed. Is this Numark the USB connected device? It may be that Windows is not automatically changing the default audio playback device from HDMI (AMD High Definition Audio) to the Numark. Go to the Sound Panel, Playback section and set the Numark as the default audio playback device. If you have an HDMI cable plugged into your video card, Windows usually automatically sets the HDMI as the default audio playback device and in those cases you must manually change it to whatever you want.

 

[dsanchez11]

Thank you for your reply. I have done so like you said. i have tried and tried many times... and still no good news.. i dont not know what it is .. And yes its a usb connected device. any other tip would be more than welcome. Thank You

 

[fireberd]

Most motherboards have on-board (on the motherboard) audio. If not using it, disable it in the BIOS. It can cause conflicts with any other audio device.