olmarik trojan computer doesn't boot need help

[gavros777]

Hello, i got this virus yesterday that my eset antivirus spotted and couldn't remove, i tried to cure it with dr web cure it but and at the end it said something like "virus couldn't save boot memory swith to normal boot?" and i clicked yes then the real problems started, everytime boot my computer it says insert windows disk to repair the windows, when i insert and try to boot from the disk i always get a blue screen, either the known dll could not be verified or page fault in non page area where it asks e to disable bios memory and shadowing and cpu internal cache.
my motherboard is evga 680i sli and i can only find the cpu internal cache where if i disable it slows down my pc to the point it gets stuck.
I tried switching hard drives and still have the same problem.

Any advice would be greatly appreciated.

 

[Jacee]

ESET has a 'removal' tool ... Standalone malware removal tools - ESET Knowledgebase

Scroll down to the Win32/OlmarikTdl4

 

[gavros777]

ESET has a 'removal' tool ... Standalone malware removal tools - ESET Knowledgebase

Scroll down to the Win32/OlmarikTdl4

i can't logon to my windows my computer asks me to repair windows when i boot by inserting the disk, and when i do that it crashes, so i can't even boot with the windows dvd
thanks for the help.

 

[Hopalong X]

This will tell you how to get into advanced boot before Windows tries to load. Start at step 3 if you only have one OS- Dual boot start at Step1.
http://www.sevenforums.com/tutorials/666-advanced-boot-options.html

From there you then use this to get into Safe Mode with Networking. This only loads base drivers.
http://www.sevenforums.com/tutorials/69585-safe-mode.html

You should be able to get on line and download and run the ESET removal tool Jacee posted.
Screen resolution may be off but it will get you where you need to go.

Mike

 

[gavros777]

This will tell you how to get into advanced boot before Windows tries to load. Start at step 3 if you only have one OS- Dual boot start at Step1.
http://www.sevenforums.com/tutorials/666-advanced-boot-options.html

From there you then use this to get into Safe Mode with Networking. This only loads base drivers.
http://www.sevenforums.com/tutorials/69585-safe-mode.html

You should be able to get on line and download and run the ESET removal tool Jacee posted.
Screen resolution may be off but it will get you where you need to go.

Mike

when i press f8 before the windows load it says to insert windows disk to repair the windows it doesn't bring the advance boot options,
when i insert the windows dvd it tries to load the files then the blue screen appears saying it can't verify a known dll or the other blue screen of no page found.
it seems the dr web cureit removed an essential dll from my computer or messed up my motherboard.
is there a way to reset my motherboard and do a clean instal of windows?
i even switched hard drives and tried to install windows on another hard drive and still crashed bringing the same blue screens right after it tries to load the files from the disc. i also used the switch button on my motherboard thinking this will reset everything and fix it.
i hope some of you guys are familiar with my situation and can guide me through it, thanks a lot.

 

[Jacee]

Do you have another computer to download the tool to a flash drive? You can then put the flash drive into the infected computer and run it (as administrator) from there.

 

[gavros777]

Do you have another computer to download the tool to a flash drive? You can then put the flash drive into the infected computer and run it (as administrator) from there.

yes i have a laptop and a memory stick after i put the tool to the memory stick how do i run it on my infected computer?
do i need to change boot from cd to boot from memory stick, and how do i do that?
thanks for the help

 

[Jacee]

Let's do this ... Choose one of these 'free' anti-virus rescue CD's to download
FREE Bootable AntiVirus Rescue CDs Download List

It will be in the form of an .ISO file. Burn the .ISO file to a CD (at a slow rate, to ensure that it isn't corrupted.)
Use Download ImgBurn 2.5.5.0 - FileHippo.com (uncheck any toolbars in the download!)

 

[Golden]

Hi,

To add to Jacee's suggestion, I reccomend not bothering with the Kaspersky Rescue Disk 10 option - I, and others, have had several issues with it running correctly - see http://www.sevenforums.com/software/152784-kaspersky-rescue-disk-10-iso-problems.html

I have used the F-Secure bootable ISO without any trouble at all, and recommend that instead.

Regards,
Golden

 

[gavros777]

i used avg rescue disk and it found 8 trojan viruses,i renamed it and still couldn't boot it, if i use the test disk option on the avg rescue disk think that might do something?

 

[Jacee]

You can try it.