One sided audio from rear panel.

[Mandark52]

My rig-
Amd Fx6300 processor
MSI 970a-g43 Mobo.

I previously had gigabyte ga-78lmt-usb3 mobo and I suffered from one sided audio from both the panels, I replaced that board thrice but still the same. So I shifted to MSI 970a-g43 but here I get one sided audio at the back panel whereas the front side i.e. the cabinets panel works completely fine. I tried all the basic stuff like re installing drivers, default playback. Please help.

 

[HarriePateman]

Have you tried a diffrent pair of head phones

 

[Mandark52]

yes! different headphones/speakers! My audio codec is Realtek Alc 887 tried the latest drivers.

 

[HarriePateman]

Hmm im stumped. do you have reltek installed?

 

[Mandark52]

Hmm im stumped. do you have reltek installed?

yes. One request please dont give up on me. Thanx for your concern

 

[HarriePateman]

I wont, however as of time difference it may take me some time to reply.

Do you have the drivers disk that came with your motherboard?

 

[Mandark52]

yes I have the disk. I installed those drivers initially and then later on uninstalled to get the latest release from the official site. Take your time but just dont't ignore like others. I really need some help.Here in India most of the people use intel's stuff so eventually no one is ready to repair my pc. Virtual help is all that I am seeking.

 

[HarriePateman]

I understand.

Can you uninstall the drivers that you have installed of the internet, and install the ones on the disk.

Report back.

 

[Mandark52]

Ok I ll do so. But tell me what to do further coz here in India it is 2:40am and I m feeling dizzy so it would be helpful if you tell me the further procedures so that I can continue in the morning.

 

[HarriePateman]

Once you have installed the drivers, see if it works?

If not go to realteks website and reinstall the drivers you need.

 

[Mandark52]

Once you have installed the drivers, see if it works?

If not go to realteks website and reinstall the drivers you need.

I tried that now but still the same. Pissed off on this problem. One said that blow some air into the rear panel.

 

[HarriePateman]

That can help as it could be a dust build up.

You mentioned you have changed the board?

And you have this installed?

Realtek Definition Audio Codecs

 

[Mandark52]

That can help as it could be a dust build up.

You mentioned you have changed the board?

And you have this installed?

Realtek Definition Audio Codecs

Hmmm yes I have changed my board and it was Gigabyte having the VIA audio codec. So I performed a clean format while shifting from the mobos. I am currently downloading the drivers from the address you have given. I ll report back soon. Thanx for your concern and will definitely scale you up even if the problem doesn't gets solved. I ll report back in few minutes.

 

[HarriePateman]

Brilliant thank you

 

[Mandark52]

No luck! I wonder how my front panels audio work fine.

 

[HarriePateman]

Is this surround sound your trying to get working if so, To configure 7.1-channel audio, you have to use an HD front panel audio module and enable the multi-channel audio feature through the audio driver.

 

[Mandark52]

Is this surround sound your trying to get working if so, To configure 7.1-channel audio, you have to use an HD front panel audio module and enable the multi-channel audio feature through the audio driver.

No. I am trying to get stereo sound. But when I partially insert the jack I get mono(centered) audio which is not so clear. I have 2.1 channel Creative speakers so should I need to enable multi-channel audio? I am not able to find it in Realtek HD Audio.