Page_fault BSOD on a new computer build.

[devante120]

Hey everyone, I just put together my new computer and I started getting a few different BSOD's. The most recent was a Page_fault_in_nonpaged_area. A memory management one happened yesterday also. I'll include the dump files so someone can check them out. If i forgot anything please let me know. Thanks

Computer specs:
i5 2500k
corsair Pro series gold 750 watt psu
p8z86-v pro/gen3 mobo
Corsair vengence blue 16gb ddr3
two Ati radeon 4600's

edit: added the diagnostic tool files

 

[Arc]

Welcome aboard

► Please enable driver verifier, so that the system can monitor the driver in a better manner.
http://www.sevenforums.com/tutorials/101379-driver-verifier-enable-disable.html

► Are you using Marvell AHCI/RAID? If so, update those. The one installed in your system is very old, of 2010.
Marvell - Support
But if you dont use Marvell, remove those drivers. I will suggest you to not use Marvell.

► Unfortunately I failed to open all the dumps, but most of those indicates to memory corruption. So I would suggest to take three tests.

• http://www.sevenforums.com/tutorials/105647-ram-test-memtest86.html
• http://www.sevenforums.com/tutorials/100352-hardware-stress-test-prime95.html
• http://www.sevenforums.com/tutorials/100356-video-card-stress-test-furmark.html

Let us know the results.

 

[devante120]

Unfortunately I cannot find zip to run Memtest with so I'm going to go buy one when I can. Prime came up with a couple errors, which I included in the zip file. If it makes any difference I have a 80gb SSD and a 1TB HDD. I forgot to say that in my first post heh.

 

[Arc]

I have a 80gb SSD and a 1TB HDD. .

And you use Marvell MV91xx AHCI/RAID driver for that, which is an old one, of Aug 2010. You may update it from Marvell - Support. But the best policy is not to use Marvell drivers. You may use windows defaults in place of it.

Almost all the dumps are shown are hardware related, some hardware cannot start with windows start, or they fails. Most probably those are Hard disks.

So first you get rid of Marvell, and then notice if those problems occur again or not. If those continue, let us know.

EDIT: You use JMicron? If there are multiple drivers to drive a single HDD, there may be a conflict, obviously.

 

[devante120]

Got rid of marvell and I still get bsod's. Same after removing Jmicron. Also programs are using large portions of my cpu, usually 20-100%. Opening new tabs in Firefox/Chrome or opening programs cause these spikes. Any idea what might cause that to happen?

Another question, is it possible that my ram is incompatible with my mobo?
Thanks again for your help, I appreciate it

 

[Arc]

Got rid of marvell and I still get bsod's. Same after removing Jmicron. Also programs are using large portions of my cpu, usually 20-100%. Opening new tabs in Firefox/Chrome or opening programs cause these spikes. Any idea what might cause that to happen?

Post your dumps then?

Another question, is it possible that my ram is incompatible with my mobo?
Thanks again for your help, I appreciate it

As your System specs say, those are compatible.

 

[devante120]

dumps as requested

 

[Arc]

A lot of different bugchecks with equal lot of probable causes.

Have you run memtest?

 

[devante120]

Ran memtest for about 13 hours. No errors

 

[Arc]

I think we need the help of hardware experts here. Please stay, I am calling them. If any of them are online, they will come right now, or will be here when they will be online.

 

[karlsnooks]

Ran memtest for about 13 hours. No errors

Fluff out completely those system specs. This helps us to help you since we look for certain info that may seem inconsequental to you.

Here's how to really fluff those specs out:
Update your SevenForums System Specs
User CP (located on the top menu bar) |
Your Profile | Edit System Spec (left-hand column)

To gather info, use Speccy (my favorite) or SIW or System Info

In the System Manufacturer Block, enter:
Ø Manufacturer and Model OR Custom build.
Ø ADD the word laptop, desktop, netbook or tablet.
For example:
Toshiba Satellite L305D notebook.

Provide full windows version info, for example:
MS Windows 7 Ultimate SP1 64-bit

Use the “Other Info” block for Optical Reader,
Mouse, touchpad, wifi adapter, speakers, monitor, etc

Scroll down and click on SAVE CHANGES.

With Speccy, you can select with your mouse/touchpad info from the display
and paste that info into your specs.

SIW is a marvelous program, but the free version does not offer
this capability.

==========================================
==========================================

HOW TO POST A SNAPSHOT OF DISK MANAGEMENT DISPLAY
Run disk management:
WIN | type DISKMGMT.MSC | ENTER
This method gives you a display without the unneeded navigation pane.
WIN=key with Microsoft logo on top.

Maximize the output of Disk Management:
Maximize the output of Disk Management:
ALT-Spacebar key combo | X key (selects Maximize) |
Drag the field separators (such as between Status and Capacity) to show entire field.


Make a snapshot:
WIN | type SNIPPING | ENTER | New
Drag the cursor around the area you want to snip.
File | Save as | select save location and name | Save


Post the snapshot:
Post a File or Screenshot in Seven Forums

 

[essenbe]

When you finish with Karlsnooks instructions, update all of your drivers from Asus website, enter bios and set optimized defaults, set your boot order, save and exit.