Please Help with Installation problem Windows 7 X64

[sebas215]

I do not get it My system is ready for the upgrade I even used the upgrade advisor thing Microsoft provides. I have a 60gb partition ready. Norton is updated and disabled. The Download from Microsoft went supposedly perfect as the integrity was checked and it was fairly quick. Then Burning with Power2go at 2.4x speed went successfully. So now when I go to install It gets to about 10% then goes ERROR some files are missing or corrupt etc.

Error Code 0x8007017

I do not see why I am getting this. The only thing it could be is the download and burning process. I have already went through 4 discs I only have 2 left =(

I really would like to try out windows 7 because i hate vista 3 weeks ago Vista screwed up my audio after an update which enables the noaudio ouput device found problem.

I have an hp dv2700 CTO entertainment notebook pc. (special edition)
4gb ram
amd turion X64 X2

Can somebody give me a link to a good iso they downloaded.

Any help is appreciated

 

[Antman]

This error is not uncommon where the optical drive may be less than 100%. Using the same file set, create a bootable USB and try again. If it works, the DVD drive is less than 100%.

 

[sebas215]

This error is not uncommon where the optical drive may be less than 100%. Using the same file set, create a bootable USB and try again. If it works, the DVD drive is less than 100%.

I am not to familiar with usbs so its not like the iso would burn to the usb would it.

Also I am sure my dvd drive is fine because I have installed ubuntu before

 

[Antman]

The tutorial is here. A couple of quick dos commands, then copy your DVD to the thumb drive. You need a 4 gb thumb drive. We see this error a lot in my shops. The drive works fine, just not perfectly.

If you have the thumb drive, and you are successful, you may never use a DVD to install again.

 

[sebas215]

Well Theres a chance the problem Is the download and the 2nd chance is the burning process.

But I really do not think it is the burning process because I didn't have a problem with it until Windows 7.

So the a faulty download from microsoft's servers may be it.

 

[Night Hawk]

The RCs are downloaded using the temp install of the MS Downloader which verifies the file integrity of the iso to insure that is 100%. The problem could well be from the program you are using to burn the iso image with, a bad batch of blank disks? unless the dvd burner itself is toast as Antman indicated.

The usb key method using the shareware version of UltraISO has been used here quite often seeing reliable results for more then just 7! A good brand flash drive 4gb at least solves the running out of blank disk problem since it is a reusable device. RWs can also serve as a substitute while usb keys are a bit more reliable seeing less installation problems.

For a pair of reliable burning programs ImgBurn a lightweight older XP orientated program is free at The Official ImgBurn Website

The second updated burning program StarBurn offers a free version for that software at :: RocketDivision :: CD/DVD/Blu-Ray/HD-DVD recording and mastering

As far as any links for downloading 7 the only link you will find posted anywhere is for the public Release Candidates on the MS page seen at http://www.microsoft.com/windows/windows-7/get/download.aspx

Those were extensively tested and signed off by MS for public availability until 8/20/2009. For anything else you have to search for that on your own.

 

[sebas215]

I am thinking of purchasing the geek squad 4gb usb on sale and good reviews.

My cd burning program is power2go and its pretty reliable. O well just a few more things to try

 

[CB]

Check your PM Bro...

 

[Night Hawk]

I am thinking of purchasing the geek squad 4gb usb on sale and good reviews.

My cd burning program is power2go and its pretty reliable. O well just a few more things to try

Presently I have about a half dozen usb flash drives by Kingston, San Disk, and PNY with the last being the worst! The San Disk are far more commonly found in retail stores and seem to work better for most usb ports and usb hubs alike while Kingston(used for a 7 on Virtual Box install presently) and OCZ are usually the better brand names for the higher prices seen on those.

I also spotted your other thread on this at http://www.sevenforums.com/installation-setup/19137-installation-problem-error-code-0x8007017.html