Problem with HDD ST3640323AS

[RealSot]

Hello I have a problem with my HDD.

I run HDT and HDS and they said:





Am I have a problem?

My system freeze..and i need restart to continie.
I preinstall my Windows 7 Ultimate x64..
I dont have problem 2-3 days but after that it happens again.
System freezes but some times I have BSOD. But it dont make a dmp file in SystemRoot%\Minidump . I check files to go there but now dmp file
When I have BSOD the system restart so quickly that I dont see error code.
After that sustem stands to beging screen on my motherbourd logo P5Q3. Only way to continie is to turn off power of PC.

My systrem is:
P5Q3
CPU Type DualCore Intel Core 2 Duo E6550, 2333 MHz (7 x 333)
Kingston 4x1 GB DDR3-1333 DDR3 SDRAM (9-9-9-24 @ 666 MHz) (8-8-8-22 @ 592 MHz) (7-7-7-19 @ 518 MHz) (6-6-6-16 @ 444 MHz)
Video Adapter NVIDIA GeForce 9800 GTX/9800 GTX+ (512 MB) DK TOP
Disk Drive ST3640323AS ATA Device (640 GB, 7200 RPM, SATA-II)
550W

I run memtest86 and its passed 2 times and I stop it...
I am have a problem with hard disck?
What to do?

 

[TVeblen]

To read the blue screen info you need to disable restart on error:

Start > Computer > System Properties (top) > Advanced System Settings (left) > Startup & Recovery > Settings > and under 'System Failure' uncheck: "Automatically Restart".

Also check to be sure that the "write an event..." is checked.

 

[mgp1964]

Backup you data ASAP, then download SeaTools for DOS and run it to check your HD, it is OS independent and will give you better testing of the whole drive.

 

[TBoyd]

I would check my SATA connections on the mobo & HD & maybe even change to a different SATA port on the mobo. If it still tests with the same problems, I agree with former post to backup all important data ASAP & replace the HD. You may consider cloning the old HD to the new HD if you don't have a WIN 7 installation disc. Hopefully there will be no problems transferred to the clone.

 

[RealSot]

I made SeaTools for DOS and it's passed every test....But today whe start system i have freeze after 2-3 min. w/e BSOD but I still need restart to continie

 

[TVeblen]

It would help if we knew what the bluescreen info was.

 

[RealSot]

I dont know it too...I uncheck Auto restart and hope to get new BSOD and post here...

 

[TVeblen]

Whay you want to do is post your crash Memory Dump File in our Crashes & Degugging forum. The BSOD guys might be able to see what is going on. Be sure to follow these instructions:
http://www.sevenforums.com/crashes-debugging/96879-blue-screen-death-bsod-posting-instructions.html

If you are not getting any dump files, see here:
http://www.sevenforums.com/tutorials/174459-dump-files-configure-windows-create-bsod.html

Let us know what you find, or link us to the new thread.

 

[RealSot]

ok 10x.
Now I am waiting ....for BSOD....
EDIT:
IT hapen again freeeze and strenge noise from speaker brzzzzzz brzzzzzzzzzz brezzzzzzz .
I wait for BSOD but it not apear for 10 minutes and i restarted....

 

[TVeblen]

Those sounds may be BIOS error codes. They will come like Morse code, either long or short beeps. You listen for the pattern: long - short - long, short - short - long, etc. The code will give you clues to what hardware is failing.

One thing you should check:
Turn off the computer, disconnect the data cable to the hard drive, then start up again. Check to see if it will boot until you get a message on the screen telling you there is no boot device (of course) without any beeping from the speakers.

 

[Qdos]

The drive you specify had updated firmware released for it.

Yours may be a unit the requires this upgrade.

Firmware upgrades are typically released because operational difficulties are found to exist.

See this page for details, downloads, and instructions.

Firmware Update for ST31500341AS, ST31000333AS, ST3640323AS, ST3640623AS, ST3320613AS, ST3320813AS, ST3160813AS