problems aft pc crash

149047

New member
Member
Local time
5:51 PM
Messages
57
hi everyone!
my pc system is recovering from a serious crash resulting from a partition chaos (i happened to have been the cause
wink.gif
)
so - the pc boots again ... BUT, there are some issues ...

1) windows 7 boots ... then goes into "starting desktop" and then remains on a light blue screen with the windows 7 build (7100) information in the lower right corner (& something like: "the authenticity of this version has not been validated yet"). nothing else. after waking up from "energy save" mode, the proper user selection tab appeared but when i clicked it, i got the same light blue blank screen - any ideas? windows repair mode does not show me any errors.
2) sorry if this is xp related but in case i will observe the same behavior in w7 also, i think its legit to add this second problem here: after merging some partitions i find several folders "inaccessible" ie: clicking on it gives me "acces denied" . i tried to boot into save mode and adjust the user authorisations - however to no avail. even here i would get the message, that i do not have the authorisation ... / i could think - however i do not know for sure, that it could somehow be related to merging of two partitions. // being in admin mode - very strange isn't it? hmm ... any clues?

can someone think of a solution?

thanks for reading,
markus
 

My Computer

OS
xp, w7
CPU
q6600
Motherboard
gigabyte p35 dq6
Memory
2x 4gb kingston 1066, hyperx cl5
Graphics Card(s)
x1950pro
hi everyone!
my pc system is recovering from a serious crash resulting from a partition chaos (i happened to have been the cause
wink.gif
)
so - the pc boots again ... BUT, there are some issues ...

1) windows 7 boots ... then goes into "starting desktop" and then remains on a light blue screen with the windows 7 build (7100) information in the lower right corner (& something like: "the authenticity of this version has not been validated yet"). nothing else. after waking up from "energy save" mode, the proper user selection tab appeared but when i clicked it, i got the same light blue blank screen - any ideas? windows repair mode does not show me any errors.
2) sorry if this is xp related but in case i will observe the same behavior in w7 also, i think its legit to add this second problem here: after merging some partitions i find several folders "inaccessible" ie: clicking on it gives me "acces denied" . i tried to boot into save mode and adjust the user authorisations - however to no avail. even here i would get the message, that i do not have the authorisation ... / i could think - however i do not know for sure, that it could somehow be related to merging of two partitions. // being in admin mode - very strange isn't it? hmm ... any clues?

can someone think of a solution?

thanks for reading,
markus

markus

I just dont know where to start. did you "merge" the partitions? How?

I think you have so, so, many problems the only way to fix them will be to re-install windows, (and xp if it doesn't work)

Ken
 

My Computer

Computer Manufacturer/Model Number
HP Pavillion dv-7 1005 Tx
OS
Win 8 Release candidate 8400
CPU
[email protected]
Memory
4 gigs
Graphics Card(s)
Nvidia 9600M
Sound Card
HD built-in
Monitor(s) Displays
17" Wxga
Screen Resolution
1440x900
Cooling
none
Internet Speed
45Mb down 5Mb up
markus

I just dont know where to start. did you "merge" the partitions? How?

I think you have so, so, many problems the only way to fix them will be to re-install windows, (and xp if it doesn't work)

Ken

ken, thanks for posting!

i merged the partitions in partition magic 8.
hm ... i guess you're right. will go an make a clean new install.
unless ... hmm ... i'll wait for another 2 hours. perhaps some idea surfaces in this forum :)
markus
 

My Computer

OS
xp, w7
CPU
q6600
Motherboard
gigabyte p35 dq6
Memory
2x 4gb kingston 1066, hyperx cl5
Graphics Card(s)
x1950pro
ken, thanks for posting!

i merged the partitions in partition magic 8.
hm ... i guess you're right. will go an make a clean new install.
unless ... hmm ... i'll wait for another 2 hours. perhaps some idea surfaces in this forum :)
markus

So you dont want to dual boot roght? did you merge before the install? does either system work?

Ken
 

My Computer

Computer Manufacturer/Model Number
HP Pavillion dv-7 1005 Tx
OS
Win 8 Release candidate 8400
CPU
[email protected]
Memory
4 gigs
Graphics Card(s)
Nvidia 9600M
Sound Card
HD built-in
Monitor(s) Displays
17" Wxga
Screen Resolution
1440x900
Cooling
none
Internet Speed
45Mb down 5Mb up
So you dont want to dual boot roght? did you merge before the install? does either system work?

Ken

ok here's the details:
i have a working xp on the system.
then i installed w7 on a second partition
everything worked fine.

then i installed w7 64bit on a third partition (just bought 8gigs of ram)

at that moment the new and the old partitions made a real mess and unfortunately i decided to do a cleanup here. so i merged some partitions (no system partitions !!!) and rearranged free space.

here partition magic must have screwed something up because from then on w7 would not show up in the mbr anymore. the error i got was a faulty ntoskrnl.exe. so i went into repair mode (from bootdisk) and made an automatic repair. after that w7 showed up in the mbr again. however - after the user-icon the desktop would not come back and stay as described.
winxp is still perfectly ok
 

My Computer

OS
xp, w7
CPU
q6600
Motherboard
gigabyte p35 dq6
Memory
2x 4gb kingston 1066, hyperx cl5
Graphics Card(s)
x1950pro
ok here's the details:
i have a working xp on the system.
then i installed w7 on a second partition
everything worked fine.

then i installed w7 64bit on a third partition (just bought 8gigs of ram)

at that moment the new and the old partitions made a real mess and unfortunately i decided to do a cleanup here. so i merged some partitions (no system partitions !!!) and rearranged free space.

here partition magic must have screwed something up because from then on w7 would not show up in the mbr anymore. the error i got was a faulty ntoskrnl.exe. so i went into repair mode (from bootdisk) and made an automatic repair. after that w7 showed up in the mbr again. however - after the user-icon the desktop would not come back and stay as described.
winxp is still perfectly ok

Ok
So xp is fine. You are going to use 64bit right? Best, fastest way is to kill 32bit, and 64, re-install 64bit and it should be fine. If you can get into the win 7 installs back up anything you need.

Ken
 

My Computer

Computer Manufacturer/Model Number
HP Pavillion dv-7 1005 Tx
OS
Win 8 Release candidate 8400
CPU
[email protected]
Memory
4 gigs
Graphics Card(s)
Nvidia 9600M
Sound Card
HD built-in
Monitor(s) Displays
17" Wxga
Screen Resolution
1440x900
Cooling
none
Internet Speed
45Mb down 5Mb up
Back
Top