windows 7 home premium 64 bit os.
windows installed the drivers correctly
and the drive was in manage disk to initialize, so I did. The 1st one I selected as GTP because that's what was recommended for drive over 2 TB. The problem is it shows the disk with a 764,308MB and won't let me increase it. Everything I've read says 3TB drives should be recognized right off in 7 64 bit.
Since I had 2 I tried the 2nd one initializing as a MBR and I got the same results.
Not finding anything that points me to how to eliminate the problem
Did not format them because of the incorrect capacity issue.
???????????????
windows installed the drivers correctly
and the drive was in manage disk to initialize, so I did. The 1st one I selected as GTP because that's what was recommended for drive over 2 TB. The problem is it shows the disk with a 764,308MB and won't let me increase it. Everything I've read says 3TB drives should be recognized right off in 7 64 bit.
Since I had 2 I tried the 2nd one initializing as a MBR and I got the same results.
Not finding anything that points me to how to eliminate the problem
Did not format them because of the incorrect capacity issue.
???????????????
My Computer
- Computer Manufacturer/Model Number
- Gateway FX601
- OS
- Windows 7 Home Premium 64 bit
- CPU
- Intel I7 - 950
- Motherboard
- FX601
- Memory
- 9216MB
- Monitor(s) Displays
- FPD1930
- Hard Drives
- 2 wd 2TB black; 2 3TB wd Greene; 1 wd 1TB; 1 Hitachi 500GB