ps3 joystick/usbs lock up pc, flashing new BIOS causes BSOD 0x000007B

[TerminusEst]

Microsoft Windows 7 Ultimate 64-bit 7601 Multiprocessor Free Service Pack 1
Intel(R) Core(TM) i7-4790K CPU @ 4.00GHz
ASUSTeK COMPUTER INC. Z97-AR
8.00 GB (2x4) Kingston HyperX Beast Memory
Sapphire Dual-X AMD R9 280 Graphics Card - 3GB GDDR5, 384-bit
(1) AMD High Definition Audio Device (2) Realtek High Definition
1920 x 1080 x 32 bits (4294967296 colors) @ 60 Hz
Seagate 2TB Barracuda

Hello I hope you can help me out. I have been encoutering strange problems with my PC last few weeks and this one causing me the most problems, I have tried system restore off the hdd and a win 7 64bit ultimate dvd without help. I have tried bootrec /fixmbr, bootrec /fixboot and bootsect /nt60 all.

I am unable to get chkdsk /f to work as anytime I schedule it through a windows CD or Windows Safe mode it never seems to actually be scheduled the BSOD pops up again.

Please help I am trying to at least get back into this windows and use AcdSee for a few hours to export a backup of the database which has a lot of important work with metadata/tags. Thank you in Advance.

1) I have have been having problems with my pc for the last few weeks, the most recent was anytime I plugged in a ps3 joystick into any usb 2 or 3 port the screen would turn into crazy colours and the pc locks up. Last thing I did was flash my BIOS in hoping that and installing new USB drivers things would get fixed. I believe that flashing my BIOS might have reset the HDD AHIC/IDE setting and so I was unable to boot into Windows, trying either HDD Bios setting now I get the BSOD screen below.

2) BSOD:
A problem has been detected and windows has been shut down to prevent damage to your computer
if this is the first time you've seen this stop error screen, restart your computer.
if this screen appears again, follow these steps:

check for viruses on your computer. remove any newly installed hard drives or hard drive controllers.
check your harddrive to make sure it is properly configured and terminated.
run chkdsk /f to check for hard drive corruption, and then restart your computer

technical information

*** STOP: 0x000007B (oxFFFF88009a97e8, oxFFFFFFFC000034 etc...

3) and this Windows Safe mode message

Problem signature:
problem event name: bluescreen
os version 6.1.7601.2.1.0.256.1
locale id 1033

additional information about the problem:
bccode c4
bcp1 = 00000000000000E3
bcp2 = FFFFF88006C81871
BCP3 = 000000076E6E69A0
BCP4 = 0000000000000000
OS Version = 6_1_7601
service pack 1_0
product 256_1

Files that help describe the problem:
c:\windows\minidump\072815-40419-01.dmp
c:\windows\Temp\WER-52665-0.sysdata.xml

DM LOG COLLECTOR zip file:

 

[Laith]

Hiya and welcome to SevenForums!rb:

BugCheck C4, {e3, fffff88006c7e871, 77aee9a0, 0}

Unable to load image \SystemRoot\system32\drivers\aswSnx.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for aswSnx.sys
*** ERROR: Module load completed but symbols could not be loaded for aswSnx.sys
Probably caused by : aswSnx.sys ( aswSnx+24871 )

BugCheck D1, {fffff8800819d638, 2, 8, fffff8800819d638}

Unable to load image \SystemRoot\system32\DRIVERS\MijXfilt.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for MijXfilt.sys
*** ERROR: Module load completed but symbols could not be loaded for MijXfilt.sys
Probably caused by : MijXfilt.sys ( MijXfilt+1b638 )

BugCheck 124, {0, fffffa80090b3028, be000000, 800400}

Probably caused by : hardware
[CODE]MODULE_NAME: hardware

IMAGE_NAME:  hardware

DEBUG_FLR_IMAGE_TIMESTAMP:  0

FAILURE_BUCKET_ID:  X64_0x124_GenuineIntel_PROCESSOR_MAE

BUCKET_ID:  X64_0x124_GenuineIntel_PROCESSOR_MAE

[/CODE]

BugCheck 18, {fffffa8006ce45b0, fffffa800b5e7c20, 1, 1}

Unable to load image \SystemRoot\system32\DRIVERS\atikmdag.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for atikmdag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmdag.sys
Probably caused by : atikmdag.sys ( atikmdag+279e0 )

Please run Prime95, if the temps goes too high, exit the test. http://www.sevenforums.com/tutorials/100352-hardware-stress-test-prime95.html

Run Display Driver Uninstaller(DDU)
Make sure you tick the Uninstall C:/AMD and C:/NIVIDA folders while you are in DDU when you are done running DDU install your graphics driver again. This is the guide for DDU: http://www.sevenforums.com/tutorials/367109-display-driver-uninstaller-how-use.html

Remember to remove Catalyst and only install the graphics driver.

Remove avast! and install Microsoft Security Essentials(MSE) for testing purposes.

Disable Driver Verifier.

You have Motioninjoy as your PS3 controller emulation tool. Remove that straight away, from my experience Motioninjoy has corrupted many many system files so i was forced to re-install windows. The damage may be already done. I recommend if you want to use something to emulate your PS3 controller use Scarlet Crush.aka.ScpVBus/ScpVMonitor.

 

[TerminusEst]

Everything Seems to be working

Hello Laith, thanks!!! for all of your help and time. I did everything you said, with a minor change I ran OCCT and FurMark instead of Prime95 (I heard they cause harm to the I7 4790K chips). I never saw temps past 72 after 15 min or so on each stress test. I did a chkdsk /f as well and I'll run hd tune pro later today to check for hdd bad sectors just in case.

I have yet to try to plug a ps3 controler into the pc. I will get the new drivers for ps3 that you recommend.

Here is the new DM Log Collector information zip file, after doing everything you have recommended.

 

[Laith]

Hmm,

BugCheck C4, {e3, fffff88006c2d871, 77a1e9a0, 0}

Unable to load image \SystemRoot\system32\drivers\aswSnx.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for aswSnx.sys
*** ERROR: Module load completed but symbols could not be loaded for aswSnx.sys
Probably caused by : aswSnx.sys ( aswSnx+24871 )

This is avast!. Disable Driver Verifier and remove avast! for testing purposes.