questions about my network

[RedBirdDad]

Check out this thread:

http://www.sevenforums.com/network-sharing/50857-network-error.html

Look familiar?

 

[jervin]

Ok I believe I figured it out from searching the internet. Some one said the "TCP/IP NetBIOS Helper" was not started so I went under computer management and service and it was there and not started I started it and I can now get on the other computers. I post this in my own thread and it works now.

good for you..
i also go computer management and services.. and i see that "TCP/IP NetBIOS Helper" is already set to automatic and it is started.. i disable it and set it back to automatic.. and i stop it and start it again.. it still have the error..

i already try this on my laptop.. also not working

 

[jervin]

can someone help me here..
i dont know what's haappening here..
i also try homegroup.. but it says incorect password

 

[computersplus]

Try This

In network and sharing make sure you have network discovery on and also turn off password protected sharing restart your computers and try again

 

[computersplus]

Router Firewall

your router firewall may be blocking it as well you can try as a test to turn off the firewall in the router and see if you can connect.

 

[jervin]

i already triple check it... and trying different settings for 1 day straight.. still cannot connect..
do u think problem is this? they have different Network Location "JcLk" and "Network"

but i already try renaming it using netsh interface set interface name="Network" newname="JcLk"
but it dont rename

 

[computersplus]

Why Two Networks

why the two networks you should have one network with both computers connecting to that same network

 

[computersplus]

Networks

with networked computers you would have each computer identified with a name like PC 1 and PC 2 you would also want each computer to belong to the same workgroup name

 

[jervin]

yeah.. i already do that.. how do i rename the Network Location? coz they have diffferent location...

 

[aem]

I'm lost with this issue, what are you up to?

 

[jervin]

i already triple check it... and trying different settings for 1 day straight.. still cannot connect..
do u think problem is this? they have different Network Location "JcLk" and "Network"

but i already try renaming it using netsh interface set interface name="Network" newname="JcLk"
but it dont rename

 

[aem]

My only rule of thumb is if you can ping a machine from another, that means you are 99.9% on the network where sharing files/foldrers is just a matter of creating such. I don't need to know if one machine is on earth and the other on the moon lol, if they can ping one another most like they are right next to one another lol.

What are the shares you are trying to connect to, and how have you attempted to connect to it?

 

[Shuttle99]

I can guess these computers will never see each other until at least they are showing on the same network. The middle icon in your picture needs to have the same name. I have no idea why you are showing two different networks but you need to have them the same.