Random BSOD 0x0000001e

[sebar]

Hi,

Attached is dump file, I am geting BSOD randomly sometimes browsing sometimes playing for no obviouse reason.

My pc is

965 Phenom II
4gb
6950 modded 6970
crucial ssd c300 64gb
Creative x-fi platinum
500gb seagate
Giagabyte ud4

Thanks

 

[panais]

Hi.

Update the software\driver for Realtek Wireless USB 2.0 Adapter

Realtek


Finish and post back.

 

[sebar]

Done,

It seems to work fine now with the exception of the broadband going down every few minutes.

No BSOD since then but will have an eye on it and will post again in the same topic if another one will happen.

Thank you very much

 

[panais]

Give it time (1-2 days maybe) work\play as usual and remember to post back.

 

[sebar]

Hi,

I had another BSOD, while browsing. Attached is dump file

Thanks

 

[zigzag3143]

Hi,

I had another BSOD, while browsing. Attached is dump file

Thanks

These crashes were caused by memory exception. Please run these two tests to verify your memory and find which driver is causing the problem.

If you are overclocking anything reset to default before running these tests.


1-Memtest.

*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

Any errors are indicative of a memory problem.

If a known good stick fails in a motherboard slot it is probably the slot.

http://www.sevenforums.com/tutorials/105647-ram-test-memtest86.html



2-Driver verifier

I'd suggest that you first backup your data and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.

http://www.sevenforums.com/tutorials/101379-driver-verifier-enable-disable.html