Random BSOD 5-20 minutes from startup

[CaerXhan]

Hi, I've been having these random BSOD crashes lately about 2 days from now and it triggers about less than 20 minutes after boot. When it did pass over 30 minutes or so, I can use it without any problems.

Everything is brand new except for GPU (less than a year), Proc AMD Phen2x4 and 4G Ram (both 3yrs). Had a fresh install of windows and some software for no more than a month and I have received BSOD just now.

I have attached log files. Any help and direction would be much appreciated. Thanks in advance!

 

[koolkat77]

Uninstall your current antivirus as it is contributing to your BSOD's. Replace with Microsoft Security Essentials & the Free version of Malwarebytes, update and make full scans separately:

Uninstallers (removal tools) for common antivirus software - ESET Knowledgebase

Help protect your PC with Microsoft Security Essentials

Malwarebytes Free​

• :info: Do not start the trial version of MalwareBytes
  
  

You may also take a look at:

Good & Free System Security Combination​

Reduce items at start up:

Performing a Clean Startup in Windows 7

Add, or Remove Startup Programs in Windows 7
​

Your Antivirus software is basically whats just needed there.

Use the System File Checker tool and Run Disk Check:

Repair Windows 7 System Files with System File Checker

Run Disk Check in Windows 7 for Bad Sectors & Errors​

Drivers: - Please update to the latest or uninstall the software and its drivers below.

   Information

• :info: Download and install Revo Uninstaller free from here:
  
  Download Revo Uninstaller Freeware​
  Opt for "Advanced Mode" and uninstall the software (also delete the leftover registry entries).

GVTDrv64.sys Tue Sep 5 13:10:02 2006
Gigabyte Easy Tune 6 driver (known BSOD issues w/Win7)
Driver Reference Table - GVTDrv64.sys

gdrv.sys Fri Mar 13 09:22:29 2009
Gigabyte Easy Saver - mobo power utility driver
Driver Reference Table - gdrv.sys

AODDriver.sys Thu Mar 4 16:58:24 2010
AMD Overdrive; also in EasyTune6 for Gigabyte motherboard [br] Known BSOD issues in Win7
Driver Reference Table - AODDriver.sys

AppleCharger.sys Thu Mar 8 07:48:06 2012
GIGABYTE On/Off Charge driver. See here for details - GIGABYTE ON/OFF Charge [br] May cause BSOD on Win7/8 systems - uninstall to test (haven't seen recently (15Jan2013))
Driver Reference Table - AppleCharger.sys

AODDriver2.sys Thu Apr 5 15:23:37 2012
AMD Overdrive; also in EasyTune6 for Gigabyte motherboard [br] Known BSOD issues in Win7
Driver Reference Table - AODDriver2.sys

(AODDriver2.sys) is either a stand-alone application, or a component of the AMD VISION Engine Control Center. This driver is known to cause BSOD's on some Win7 systems. Please uninstall all AMD/ATI video stuff from Control Panel...Programs...Uninstall a program. Then, download (but DO NOT install) a fresh copy of the ATI drivers from Global Provider of Innovative Graphics, Processors and Media Solutions | AMD (in the upper right corner of the page) Use this procedure to install the DRIVER ONLY: ATI video cards - DRIVER ONLY installation procedure

dtsoftbus01.sys Thu Jun 20 13:22:51 2013
Daemon Tools driver [br] Possible BSOD issues in Win7
Driver Reference Table - dtsoftbus01.sys

Daemon Tools (and Alcohol % software) are known to cause BSOD's on some Win7 systems (mostly due to the sptd.sys driver, although we have seen dtsoftbus01.sys blamed on several occasions). Please uninstall Daemon Tools.

DuplexSecure - FAQ​

As an alternative, many people recommend the use of Total Mounter or Magic ISO

Upload a screenshot using:

CrystalDiskInfo​

:tip: For how to upload a screenshot or file, read here

Test your Hard Drive by running:

Hard Drive Diagnostic Procedure​

Test and Diagnose RAM Issues with Memtest86+:

RAM - Test with Memtest86+​

   Tip

• :info: Pay close attention to part 3 of the tutorial "If you have errors"
• :tip: Test the RAM with Memtest86+ for at least 7-10 passes. It may take up to 22 passes to find problems. Make sure to run it once after the system has been on for a few hours and is warm, and then also run it again when the system has been off for a few hours and is cold.

Monitor hardware temperature with system monitoring software like Speccy or HWMonitor:

Piriform - Speccy

CPUID - HWMonitor​

Dumps....

[FONT="Lucida Console"]Built by: 7601.18113.amd64fre.win7sp1_gdr.130318-1533
Debug session time: Mon Aug 19 10:10:36.081 2013 (UTC + 6:00)
System Uptime: 0 days 0:02:22.704
BugCheck D1, {ffffffffffffffd8, 2, 0, fffff88006fcec43}
*** WARNING: Unable to verify timestamp for EtronXHCI.sys
*** ERROR: Module load completed but symbols could not be loaded for EtronXHCI.sys
Probably caused by : EtronXHCI.sys ( EtronXHCI+bc43 )
BUGCHECK_STR:  0xD1
PROCESS_NAME:  System
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Built by: 7601.18113.amd64fre.win7sp1_gdr.130318-1533
Debug session time: Mon Aug 19 10:07:35.325 2013 (UTC + 6:00)
System Uptime: 0 days 0:12:35.948
BugCheck D1, {ffffffffffffffd8, 2, 0, fffff8800800bc43}
*** WARNING: Unable to verify timestamp for EtronXHCI.sys
*** ERROR: Module load completed but symbols could not be loaded for EtronXHCI.sys
Probably caused by : EtronXHCI.sys ( EtronXHCI+bc43 )
BUGCHECK_STR:  0xD1
PROCESS_NAME:  System
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Built by: 7601.17514.amd64fre.win7sp1_rtm.101119-1850
Debug session time: Sun Aug 18 06:44:14.767 2013 (UTC + 6:00)
System Uptime: 0 days 0:02:16.391
BugCheck D1, {ffffffffffffffd8, 2, 0, fffff88006c75c43}
*** WARNING: Unable to verify timestamp for EtronXHCI.sys
*** ERROR: Module load completed but symbols could not be loaded for EtronXHCI.sys
Probably caused by : EtronXHCI.sys ( EtronXHCI+bc43 )
BUGCHECK_STR:  0xD1
PROCESS_NAME:  System
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Built by: 7601.17514.amd64fre.win7sp1_rtm.101119-1850
Debug session time: Sun Aug 18 06:28:36.779 2013 (UTC + 6:00)
System Uptime: 0 days 0:01:06.403
BugCheck D1, {ffffffffffffffd8, 2, 0, fffff88006c2fc43}
*** WARNING: Unable to verify timestamp for EtronXHCI.sys
*** ERROR: Module load completed but symbols could not be loaded for EtronXHCI.sys
Probably caused by : EtronXHCI.sys ( EtronXHCI+bc43 )
BUGCHECK_STR:  0xD1
PROCESS_NAME:  System
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Built by: 7601.17514.amd64fre.win7sp1_rtm.101119-1850
Debug session time: Sun Aug 18 06:26:49.653 2013 (UTC + 6:00)
System Uptime: 0 days 0:03:02.276
BugCheck D1, {ffffffffffffffd8, 2, 0, fffff88006b9bc43}
*** WARNING: Unable to verify timestamp for EtronXHCI.sys
*** ERROR: Module load completed but symbols could not be loaded for EtronXHCI.sys
Probably caused by : EtronXHCI.sys ( EtronXHCI+bc43 )
BUGCHECK_STR:  0xD1
PROCESS_NAME:  System
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Built by: 7601.17514.amd64fre.win7sp1_rtm.101119-1850
Debug session time: Sun Aug 18 06:17:06.138 2013 (UTC + 6:00)
System Uptime: 0 days 0:04:31.761
BugCheck D1, {ffffffffffffffd8, 2, 0, fffff88006fd5c43}
*** WARNING: Unable to verify timestamp for EtronXHCI.sys
*** ERROR: Module load completed but symbols could not be loaded for EtronXHCI.sys
Probably caused by : EtronXHCI.sys ( EtronXHCI+bc43 )
BUGCHECK_STR:  0xD1
PROCESS_NAME:  System
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Built by: 7601.17514.amd64fre.win7sp1_rtm.101119-1850
Debug session time: Sun Aug 18 06:11:55.387 2013 (UTC + 6:00)
System Uptime: 0 days 0:10:22.010
BugCheck D1, {ffffffffffffffd8, 2, 0, fffff88007275c43}
*** WARNING: Unable to verify timestamp for EtronXHCI.sys
*** ERROR: Module load completed but symbols could not be loaded for EtronXHCI.sys
Probably caused by : EtronXHCI.sys ( EtronXHCI+bc43 )
BUGCHECK_STR:  0xD1
PROCESS_NAME:  System
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``[/FONT]