random bsod adobe LR often not always, may be double faults?

[RACE]

NEW user here. knowledge very small I think I uploaded what the dm collector did but have no idea if it is information or the exe.? This issue is months of agony now. I will try and execute however the forum provides a path. Thank you now for trying.

I think I have figured out that it is a zip file. I must have attached the dm.exe. Adding what I think you want here.

just did scannow in safe mode. report is no integrity violations whatever value that is.

update: sys will not even run malwarebytes. BSOD @ ~ 20 min of scan every time yes, even in safe mode. I detached all drives except C. other than malwarebytes nothing running at all in safe mode. Should I just lose the last 5 years and format and reload? Windows never seems fixable to me. I was hoping someone on this site would have some deep knowledge.

 

[ICIT2LOL]

Hello and welcoe RACE mate no don't get too hasty is there a chance you can run this in safe mode

http://www.sevenforums.com/tutorials/433-disk-check.html < if necessary include the /f and /r in the command line as per Option2
Run these in safe mode and the sfc often best run for two to three runs – you can leave out the /r switch in ckdsk if you feel it not necessary
NB SFC best run for about three scans

 

[BorisTheAnimal]

Hello RACE and welcome to 7 Forums!

I've looked over your dumps in the upload and one of the dumps complained about VBoxNetLwf.sys which is the driver for "VirtualBox NDIS 6.0 Lightweight Filter Driver" so I would recommend you update VirtualBox if you are using it!

Another dump pointed to that you should update your BIOS as it might cause some incompatibilities.

Follow the instructions on this page carefully:

EVGA - Download Center

View attachment 392291

I would also recommend that you install the chipset drivers for your motherboard:

EVGA - Download Center

View attachment 392288

View attachment 392289

This is enough for now. We'll continue after the above is done!

Cheers, Boris

 

[RACE]

Thank you very much for the analysis. I do not use the VB now so, will just remove it. that should solve yes? Also, BIOS, I had problems w/ the bios on these boards at start years back, I will certainly go look and I do know I loaded the MB stuff at original install. I take it that just redoing that install should be a reasonable update try. This board has 3 bios switches. will try and renew the bios on 1 and see if this helps.
I think all this may take an hour. I just finally got malwarebytes to run all through after telling it to ignore all the picture folders on my destop for transfer. will just put in a reply when I get done. I do appreciate the help.

 

[RACE]

15:30 hrs. moved to bios # 2 which is v1.22 same as on site and what was on position 1. This is however a different bios. the MOBO chipset, I tried just installing in windows. it mentioned it should be put in before any other drivers. I take that to mean this is best done only on a complete rebuild. I did it anyhow. error returned as fail. I append the report logs

Virtual box removed.

 

[BorisTheAnimal]

Cool, keep us posted

 

[BorisTheAnimal]

15:30 hrs. moved to bios # 2 which is v1.22 same as on site and what was on position 1. This is however a different bios. the MOBO chipset, I tried just installing in windows. it mentioned it should be put in before any other drivers. I take that to mean this is best done only on a complete rebuild. I did it anyhow. error returned as fail. I append the report logs

Virtual box removed.

Right, tried to get an idea what that error is you are getting, you might want to try using this tool by Intel but I'm not sure if it will be able to install it, if it doesn't work after using Intel's driver update utility then we move on:

Intel® Driver Update Utility

Cheers, Boris

 

[RACE]

Boris, I am glad just for a path. can you inform me as to why the chipset will not update? The bios could I suppose just get old and corrupted. I may reflash the #1 when I am up late sometime. It may be v1.21 but, I think I remember it being v1.22 also. I presume now that I just run it for some day(s) or so and see if it seems better? Thank you anyhow, I have no way to know what the info in those logs is informing me of.

The intel update site also said "no update available" I suspect this is due to EVGA customizing.

 

[BorisTheAnimal]

Boris, I am glad just for a path. can you inform me as to why the chipset will not update? The bios could I suppose just get old and corrupted. I may reflash the #1 when I am up late sometime. It may be v1.21 but, I think I remember it being v1.22 also. I presume now that I just run it for some day(s) or so and see if it seems better? Thank you anyhow, I have no way to know what the info in those logs is informing me of.

The intel update site also said "no update available" I suspect this is due to EVGA customizing.

No, I mean we actually no way of knowing what version you had installed but if the Intel tool said there isn't an update I think we are in the clear. It was just a thought I had since the file on EVGAs site was fairly new.

I'll start looking at your files again to see if there are any other things to do.

I'll keep you posted.

Cheers, Boris

 

[RACE]

for icit2lol

I am not ignoring you, I stayed busy a bit. If I am correct is not that scan for iron drives? I have unplugged all 4 of my iron drives to troubleshoot the SSD that is the C.

for both of you nice folk who are trying to help, I am posting here from my Linux Mint machine that runs flawlessly while working on the windows machine that runs like...well...windows.

 

[ICIT2LOL]

Hmm might bw worth doing these on the SSD mate simple I know because I am not so well up on those other things like Boris. It certainly will do no harm
http://www.sevenforums.com/tutorials/1538-sfc-scannow-command-system-file-checker.html
http://www.sevenforums.com/tutorials/433-disk-check.html < if necessary include the /f and /r in the command line as per Option2
Run these in safe mode and the sfc often best run for two to three runs – you can leave out the /r switch in ckdsk if you feel it not necessary
NB SFC best run for about three scans

Also I am left wondering if nothing becomes of those then maybe a Seatools check might be worth running on the drive. See this link My Solid State Drive may be defective, how can I test it?

 

[BorisTheAnimal]

Also I am left wondering if nothing becomes of those then maybe a Seatools check might be worth running on the drive. See this link My Solid State Drive may be defective, how can I test it?

Not to take the spotlight away from John but..

RACE I would recommend that you check with Samsung Magician the health of your SSD.

Access Denied

Cheers, Boris

 

[ICIT2LOL]

Yep go with what Boris has suggested and then try Seatools as I have had issues with the Magician software in the past (it is known for wrecking the USB ports set up for example) and why I didn't suggest it.

 

[RACE]

process update

Good Day All! I did reflash both bios last night late. As I said, removed virtual box. will ask on that at end. I have run the scannow 2X both times it returned "Windows Resource Protection did not find any integrity violations." After the bios update and VB removal I have run some LR and general stuff now for about 4 hours or a bit more. It was dumping around every 45 min and this is the longest it has run for a bit.
1 removed several small programs and reloaded Google Earth as it was not doing correctly also
2 disconnected all iron drives and ran scannow on SSD
3 tried but failed to do chipsest update. This has been done in last year w/ same result so, I think I have what is available for this MOBO.
4 reflashed bios w/ same as was available. v 1.22 from EVGA I guess this may just get bad over time?
5 late last night I took my life in hand and actually tried to set the CPU and ram in bios! Now have the # 2 bios loaded (reflashed) CPU @ 3.7Ghz (very small increase) Ram is at 2108.2 11-12-12-32 2T. First time I have ever done this and I do see an improvement in renders in LR . So far, So good.
6. Removed Virtual Box entirely. Reconnected 2 of 4 iron drives. used machine for a while.
7. Ran scannow again just minutes ago. result above

Now, I have to ask the masters, how is it that a program that is not invoked or running (virtual box) can cause errors in a system. I am ignorant of this logic.

Thank you all for staying with this. I intend to do updates until I am satisfied and then will set this as solved when I believe it is.

Inquiry? what do you all think of CC Cleaner for registry? I hear it is wonderful, terrible, dangerous, safe, indispensable, necessary, depending on the site one visits.

 

[RACE]

Boris, your signature picture is just wonderful art. If you did that I am in awe.

for icit2lol I just ran chkdsk /f and it did its thing too fast for me to even get the camera to make a photo. I saw no report of thing I did not like as I watched however.

 

[ICIT2LOL]

RACE if you want you can check the chkdsk results see this rather than me go through it all
https://support.4it.com.au/article/...isk-chkdsk-logs-from-event-viewer-on-windows/

The CCleaner I use all the time and if you are checking the registry and do want to fix the issues just make sure your save the results first (usually to Docs library) because then if things go belly up then you can merge them back into the registry from where you saved them in that location.

I (we all use it pretty well) use CC all the time marvelous tool. Plus if you are deleting Cookies after Analysing - you find them by clicking on Options > Cookies then make sure you save any that are linked to your passworded sites otherwise you will find them having to be logged into again - tedious - just highlight the ones to keep and send them to the right hand listing then go back and Run cleaner.

 

[RACE]

Well, I got that and see it says some housekeeping and no report of bad stuff. thank you for that easy link, bookmarked now. For the life of me I have no idea how to insure that I see replies from you real time. I have to reload, row around, it just seems random how to find a reply here. Is there a setting you know of in the forum? Thank you all, so far today it is better than the last 9 days have been.

 

[ICIT2LOL]

RACE mate you should just get an email from the forum - just check your email is in your profile and it is usually a few seconds to minutes that that takes as posts are monitored by the forum admin (moderators) to ensure that nothing untoward is being posted ie that you are using bad language or accidentally giving out your activation coded to outright illegal stuff.

CC I keep pinned to the taskbar as I use it so much as well as other programs I like quick access to see pic.

If you want something is very handy and I like to call it my bible it is this and I keep this on my favourites/bookmarks it is a tutorial by the master Brink and if it will make a lot of difference to your machines performance as long as you don't mind losing some of the "bling" like transparency for example.
http://www.sevenforums.com/tutorials/11728-optimize-windows-7-a.html

 

[RACE]

Thank you for that, will keep it in mind. Most helpful of both of you. I do hope Boris is still on, I do have a question about the dumps. As of now the machine has run over 24 hours now w/o a barf...er..I mean BSOD. I has even run Lightroom which has been the challenge in which most of the bad was happening. A big WELL DONE to you both.

 

[RACE]

WELL, as usual, spoke too soon. Thirty minutes back it started just hanging the mouse and music stutter lock. wait a bit, it comes out for a few seconds. I am assuming that this overclocking thing is just not doable no matter how small it is. I have never had it work. BSOD and thus a new dump after a while. I have put it all back to defaults now. shall see. For Boris if you could, I would like to see if the other dumps have other issues in them. Still, better than was.