Random BSOD critcal object termination and others

[Neyoh]

Hi,

Since 1 years i have lot of BSOD and i don't find the cause of his problems.
I tested :
- check RAM memory86+ 8 pass 0 error.
- check disk with chckdsk /f : no problem
- check all drivers.
- temperature of CPU and GPU are OK.


My bsod are very random every 10min or 5days, on average 4 per day. In-game or not.
But sometimes, this occurs when i connect a USB Key it's strange ... or my computer just freezing with no bsod.
Yesterday, i played 2hours on GTA V and i haven't no bsod.

Finally, I hope you can help me. Thanks
Neyoh

 

[Boozad]

Both of your dumps are giving this.

CRITICAL_OBJECT_TERMINATION (f4)
A process or thread crucial to system operation has unexpectedly exited or been
terminated.
Several processes and threads are necessary for the operation of the
system; when they are terminated (for any reason), the system can no
longer function.
Arguments:
Arg1: 0000000000000003, Process
Arg2: fffffa80074e9060, Terminating object
Arg3: fffffa80074e9340, Process image file name
Arg4: fffff80003385940, Explanatory message (ascii)

Debugging Details:
------------------

----- ETW minidump data unavailable-----

PROCESS_OBJECT: fffffa80074e9060

IMAGE_NAME:  csrss.exe

DEBUG_FLR_IMAGE_TIMESTAMP:  0

MODULE_NAME: csrss

FAULTING_MODULE: 0000000000000000 

PROCESS_NAME:  csrss.exe

EXCEPTION_CODE: [COLOR=Red](NTSTATUS) 0xc0000006 - The instruction at 0x%p referenced memory at 0x%p. The required data was not placed into memory because of an I/O error status of 0x%x.[/COLOR]

BUGCHECK_STR:  [COLOR=Red]0xF4_IOERR[/COLOR]

I know you say you've run CHKDSK but can you run it again, and also run Seatools (you do have an HDD not an SSD yes?)

:ar: Run SeaTools to check the integrity of your HDD. http://www.sevenforums.com/tutorials/313457-seatools-dos-windows-how-use.html

:ar: Run chkdsk. http://www.sevenforums.com/tutorials/433-disk-check.html

Post back with the results and we'll go from there.

 

[Neyoh]

Tomorrow, i will test with this tool.
But i have SSD (SanDisk ultra plus 128go) for this system and HDD (seagate barracuda 1to) for data/game ...ect
I can launch test "long repair" on my HDD seagate it's good ? Maybe it's my HDD witch do crash windows ? And this test can delete data on my HDD ?

edit : I have an others blue screen KERNEL_DATA_INPAGE_ERROR, i join new zip file into this post

 

[Neyoh]

I tested SeaTools on my HDD and SSD, no problem.

I just checked SSD with chckdsk, it's all good.

 

[Boozad]

Download the SanDisk Toolbox for your SSD from here to check your SSD.

 

[Neyoh]

I checked my SDD with this tool, it's OK.

 

[Boozad]

Can you check all the physical SATA connections between your drives and the motherboard please.

 

[Boozad]

Of your last three dumps two were the same as quoted previously but there is also a 0x7A which states:

ERROR_CODE: (NTSTATUS) [COLOR=SeaGreen]0xc00000c0[/COLOR] - [COLOR=Red]This device does not exist[/COLOR].

BUGCHECK_STR:  0x7a_c00000c0

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  CODE_CORRUPTION

PROCESS_NAME:  firefox.exe

CURRENT_IRQL:  0

ANALYSIS_VERSION: 6.3.9600.17029 (debuggers(dbg).140219-1702) amd64fre

Open an elevated command prompt and type in or copy and paste sfc /scannow and hit enter.

 

[Neyoh]

Can you check all the physical SATA connections between your drives and the motherboard please.

I'm not at home.
But reflecting, on my motherboard i believe that my 2 drive SSD & HDD are connected on SATA II port instead of SATA 3.0.
Do you think this can be the cause of my problem ?

Of your last three dumps two were the same as quoted previously but there is also a 0x7A which states:

ERROR_CODE: (NTSTATUS) [COLOR=SeaGreen]0xc00000c0[/COLOR] - [COLOR=Red]This device does not exist[/COLOR].

BUGCHECK_STR:  0x7a_c00000c0

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  CODE_CORRUPTION

PROCESS_NAME:  firefox.exe

CURRENT_IRQL:  0

ANALYSIS_VERSION: 6.3.9600.17029 (debuggers(dbg).140219-1702) amd64fre

Open an elevated command prompt and type in or copy and paste sfc /scannow and hit enter.

Tonight, i will test this and check physical SATA connections.

Thank you very much for your help, i'll keep you in the loop.

 

[Boozad]

I'm not at home.
But reflecting, on my motherboard i believe that my 2 drive SSD & HDD are connected on SATA II port instead of SATA 3.0.
Do you think this can be the cause of my problem ?

I doubt it, the drives will be backwards compatible, they'll just have slower transfer rates than they're capable of as it's governed by the controller. The only way the SATA II ports can cause problems is if they're going bad (which is still a possibility).

Tonight, i will test this and check physical SATA connections.

Thank you very much for your help, i'll keep you in the loop.

You're welcome, keep us informed of how things go.

 

[Neyoh]

I check physical connection and i run sfc /scannow command, no problem.

But for 2 days i haven't had bsod. Seatools would have solved the problem ?

 

[Boozad]

I don't know whether Seatools fixes drive issues, I only recommend it for diagnostic purposes. It's sounds good that you're not getting any more BSODs, monitor the system for a few days and let us know how you get on.

 

[Neyoh]

I said nothing, i just crashed but during this one, i wasn't at PC.
Totally random

 

[Boozad]

I'll take a look later tonight, I'm at work at the moment.

 

[Boozad]

The dump is still blaming a problem with the SSD/HDD. Can you plug your SSD into another SATA port on your motherboard and test the system.

KERNEL_DATA_INPAGE_ERROR (7a)
The requested page of kernel data could not be read in.  Typically caused by
a bad block in the paging file or disk controller error. Also see
KERNEL_STACK_INPAGE_ERROR.
If the error status is 0xC000000E, 0xC000009C, 0xC000009D or 0xC0000185,
it means the disk subsystem has experienced a failure.
If the error status is 0xC000009A, then it means the request failed because
a filesystem failed to make forward progress.
Arguments:
Arg1: fffff6fc400087c8, lock type that was held (value 1,2,3, or PTE address)
Arg2: ffffffffc00000c0, error status (normally i/o status code)
Arg3: 0000000039be7860, current process (virtual address for lock type 3, or PTE)
Arg4: fffff880010f9880, virtual address that could not be in-paged (or PTE contents if arg1 is a PTE address)

Debugging Details:
------------------


[COLOR=Red]ERROR_CODE: (NTSTATUS) 0xc00000c0 - This device does not exist.[/COLOR]

 

[Neyoh]

Yes, i did it(switch sata port and switch cable) but 10min after i also crashed, no bsod but screen freeze.
Maybe SSD's power is unstable ?

ps: i join again dump rar.

 

[Neyoh]

I crashed 3 times today again ....
I give you new dump rar.