Random BSOD CRITICAL_OBJECT_TERMINATION

[netimports]

Hello,

Got a Inspiron One (AIO) desktop and been getting these BSOD which happen pretty much randomly.

Dell Inspiron ONE2205
AMD X2 240e 2.8Ghz
4GB
Windows 7 64 Bit Home Premium

The last two happened today, but most likely were because of my ati catalyst update.

ntoskrnl.exe (nt+0x7F1C0)
Bugcheck code: 0xF4 (0x3, 0xFFFFFA8006A44B30, 0xFFFFFA8006A44E10, 0xFFFFF80002FE2510)
Error: CRITICAL_OBJECT_TERMINATION
file path: C:\Windows\system32\ntoskrnl.exe

What I have done already:
malwarebytes > clean
sfc > no errors
memtest > couple of hours no errors
occt > no bs / crash
hdd > no bad/pending bad sectors / surface test clean

Any help would be appreciated.
Dumps are attached.

Thanks

 

[Arc]

Hello netimports.

F4 is usually a storage related stopcode. Are you using a SSD? If so, update the firmware now.

if not follow the steps for all the HDDs.

1. Reseat the sata and power.
2. Run chkdsk /f/r, following the option two of the tutorial Disk Check
3. Seatool for dos: SeaTools | Seagate download
   Burn it in a blank cd. boot from the CD, click on "Accept", wait for it to finish detecting the drives, then in the upper left corner select "Basic Tests", then select "Long Test" and let it run.

Let us know the results.