Solved Random BSOD ntoskrnl + hal.dll error

[JoeKazama]

Hello,

Since two weeks, I had been fighting to find any solution to my problem but in vain. So i decided to ask here for some help. I swap RAM, HDD, GPU , PSU but in vain. I think that my CPU may be failing.
I attached 2 minidump to this thread since I just re-install win again.

 

[Arc]

Post it following the Blue Screen of Death (BSOD) Posting Instructions.

 

[JoeKazama]

Sorry for the first post, is this one ok ??
And thank you for the help.

 

[Arc]

Are you overclocking? As you are getting BSODs, you should stop overclocking and run all the hardware components like CPU, GPU and RAM to their default settings.

Is the computer hot? Report us the heat of the computer after a couple of hours of your normal usage. Upload a screenshot of the summery tab of Speccy. Alternatively, you can publish a Speccy snapshot too: http://www.sevenforums.com/tutorials/311593-speccy-publish-snapshot-your-system-specs.html .

Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.

If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

Stress test the Graphics Card using Furmark.
Video Card - Stress Test with Furmark

Stress test the CPU.
Hardware - Stress Test With Prime95

Let us know the results.
_______________________________________________________________________________________

*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

[COLOR=Red]BugCheck 124[/COLOR], {[COLOR=Red]0[/COLOR], fffffa8002a13038, b2000040, 800}

[COLOR=Red]Probably caused by : hardware[/COLOR]

Followup: MachineOwner
---------

http://pcsupport.about.com/od/fixtheproblem/tp/clearcmos.htm

 

[JoeKazama]

Hello,

Everything is by default, even the win is freshly installed. And i don't know how to overclock.

Here is the speccy snapshot : http://speccy.piriform.com/results/NP5bGYi2X24GMYS6GIOYmPe

As for the other test, I'll do it overnight and post the results afterwards.
I forgot to add that on my 500GB HDD, i did three partition, 60gb, 203gb, 203gb. On the 60gb, I installed win xp and on that also I got BSOD.

Thank you for your help.

 

[JoeKazama]

Hello again,

For furmark, did the test for 30mins, no BSOD or error.
For Prime95, its different, as soon as I launch the test, got one error. See attach printscreen and result.txt also.
For memtest, 8 pass, 0 error.

Good night and thank again.

 

[Arc]

[Sun Dec 29 12:33:34 2013]
FATAL ERROR: Rounding was 0.4999820516, expected less than 0.4
[COLOR=Red]Hardware failure detected[/COLOR], consult stress.txt file.
FATAL ERROR: Rounding was 0.5, expected less than 0.4
[COLOR=Red]Hardware failure detected[/COLOR], consult stress.txt file.
[Sun Dec 29 12:37:17 2013]
FATAL ERROR: Resulting sum was 1638145963456.172, expected: 1718318686314.864
[COLOR=Red]Hardware failure detected[/COLOR], consult stress.txt file.
FATAL ERROR: Rounding was 0.5, expected less than 0.4
[COLOR=Red]Hardware failure detected[/COLOR], consult stress.txt file.

I would suggest you to replace the CPU with a similar one.

 

[JoeKazama]

I will try that tomorrow, a friend will lend me one.
Will report back tomorrow so.
Thank for help again.

 

[JoeKazama]

I just swap CPU and its seems to be working fine for the moment.
Thanks for the help Arc.
If ever the problem arise again, i'll post back.

 

[Arc]

I just swap CPU and its seems to be working fine for the moment.
Thanks for the help Arc.
If ever the problem arise again, i'll post back.

Well done!