Random BSOD of GPU

[pavlos77]

Wherever i am it shows me bsod .I have tried to update the drivers but nothing happens...Here's the specs , the pic and files you need:
Is Windows 7 x86 ,full retail (not original), 6 months installed
The hardware is about 4 years old,only the GPU is 6 months old
No overclocking
CPU: Intel core duo cpu e6750
GPU: ATI Radeon HD 4800
MB : ASUS striker ii extreme (BIOS default)
RAM: 2GB RAM
Sorry , i can't give more information because the pc it's not mine..

 

[zigzag3143]

Wherever i am it shows me bsod .I have tried to update the drivers but nothing happens...Here's the specs , the pic and files you need:
Is Windows 7 x86 ,full retail (not original), 6 months installed
The hardware is about 4 years old,only the GPU is 6 months old
No overclocking
CPU: Intel core duo cpu e6750
GPU: ATI Radeon HD 4800
MB : ASUS striker ii extreme (BIOS default)
RAM: 2GB RAM
Sorry , i can't give more information because the pc it's not mine..

Virtually all of these crashes are the same. Please do the asacpi and sptd first then the TDR116


1-ASACPI.SYS

The pre 2009 version of this driver is a known BSOD cause.

Please visit this link: ASUS teK Computer Inc. -Support- Drivers and Download P7P55D LE
http://support.asus.com/download.as...D LE&p=1&s=32&os=29&hashedid=e7Zic83PvQSr80Lm

Scroll down to the Utilities category, then scroll down to the "ATK0110 driver for WindowsXP/Vista/Windows 7 32&64-bit" (it's about the 12th item down).
Download and install it.
Go to C:\Windows\System32\drivers to check and make sure that the ASACPI.SYS file is date stamped from 2009 or 2010 (NOT 2005).


2-Please remove any CD visualization programs such as Daemon Tools and Alcohol 120%.

They use a driver, found in your dmp, called sptd.sys, that is notorious for causing BSODs.

Use this SPTD uninstaller DuplexSecure - Downloads http://duplexsecure.com/faq

when you're done you can use this Freeware MagicISO Virtual CD/DVD-ROM(MagicDisc) in its place.





"It's not a true crash, in the sense that the bluescreen was initiated only because the combination of video driver and video hardware was being unresponsive, and not because of any synchronous processing exception".

Since Vista, the "Timeout Detection and Recovery" (TDR) components of the OS video subsystem have been capable of doing some truly impressive things to try to recover from issues which would have caused earlier OSs like XP to crash.

As a last resort, the TDR subsystem sends the video driver a "please restart yourself now!" command and waits a few seconds.

If there's no response, the OS concludes that the video driver/hardware combo has truly collapsed in a heap, and it fires off that stop 0x116 BSOD.

If playing with video driver versions hasn't helped, make sure the box is not overheating.

Try removing a side panel and aiming a big mains fan straight at the motherboard and GPU.

Run it like that for a few hours or days - long enough to ascertain whether cooler temperatures make a difference.

If so, it might be as simple as dust buildup and subsequently inadequate cooling.

I would download cpu-z and gpu-z (both free) and keep an eye on the video temps Let us know if you need help http://www.sevenforums.com/crash-lo...op-0x116-video_tdr_error-troubleshooting.html

 

[pavlos77]

Virtually all of these crashes are the same. Please do the asacpi and sptd first then the TDR116


1-ASACPI.SYS

The pre 2009 version of this driver is a known BSOD cause.

Please visit this link: ASUS teK Computer Inc. -Support- Drivers and Download P7P55D LE
http://support.asus.com/download.asp...Zic83PvQSr80Lm

Scroll down to the Utilities category, then scroll down to the "ATK0110 driver for WindowsXP/Vista/Windows 7 32&64-bit" (it's about the 12th item down).
Download and install it.
Go to C:\Windows\System32\drivers to check and make sure that the ASACPI.SYS file is date stamped from 2009 or 2010 (NOT 2005).


2-Please remove any CD visualization programs such as Daemon Tools and Alcohol 120%.

They use a driver, found in your dmp, called sptd.sys, that is notorious for causing BSODs.

Use this SPTD uninstaller DuplexSecure - Downloads http://duplexsecure.com/faq

when you're done you can use this Freeware MagicISO Virtual CD/DVD-ROM(MagicDisc) in its place.

I did all of these you said yesterday and until now it's all ok.Only when i play game it shows me squares and then the screen goes black...I will try to upload a video or photo to understand better...

 

[pavlos77]

So, because the first test didn't solve my problems , i go to second test.I installed the furmark and i run the test and after 10 sec it shows me a grey screen and i can't do anything...What's this means?The GPU temprature was 45C before i run the test....

 

[zigzag3143]

So, because the first test didn't solve my problems , i go to second test.I installed the furmark and i run the test and after 10 sec it shows me a grey screen and i can't do anything...What's this means?The GPU temprature was 45C before i run the test....

SO you took daemon tools out, and updated asacpi.sys right?

 

[pavlos77]

Yes the asacpi.sys is the newest(2010 i think) and i used the tool you gave me to uninstall the sptd...

 

[zigzag3143]

Yes the asacpi.sys is the newest(2010 i think) and i used the tool you gave me to uninstall the sptd...

so do you have new dmp's to upload???

 

[pavlos77]

Here's the dmp files...But,now i don't know what else can i do.I ran again the furmark and it shows me BSOD immediately.Also, i ran a |MG| Video Memory Stress Test and it shows me this:

WARNING: Your card can be not compatible with this test! If multiple errors will found, try test with onscreen buffer usage or wthout of ignoring colors bit mask.
Changing video mode to 640x480x16...OK
[11/2/2011 1:20:13 PM] Test started for "ATI Radeon HD 4800 Series "...
Trying 16bpp RGB:565 mode...OK
Error at [12611838]: must be 0100, but found 0000 (bits: 0000000100000000)
Trying 16bpp RGB:555 mode...OK
Trying 16bpp BGR:565 mode...NOT SUPPORTED (Code: 80004001)
Trying 32bpp RGB:888 mode...OK
Error at [12A21078]: must be 00000100, but found 00000000 (bits: 00000000000000000000000100000000)
Trying 32bpp BGR:888 mode...NOT SUPPORTED (Code: 80004001)
[11/2/2011 2:06:26 PM] Pass completed (2 errors found).

 

[pavlos77]

It shows me again BSOD but with other code and it's a little strange this time(the prurple lines on the screen and it's not very clear, look carefully).I will upload dump files...

 

[pavlos77]

Can anyone help me?