Random BSOD

[Tallang]

Hi!
I have very recently built my own PC. It has the following specifications:

Hardware:
Intel i7 950 @3,07GHz
Asus P6X58D-E
Corsair Dominator DHX+ DDR3 1600MHz 8GB
XFX Radeon HD 6870 1 GB
OCZ Vertex 2 90 GB
2 x Western Digital Caviar Green 2 TB 64 MB Cache

Software:
Windows 7 Professional x64

Everything went smooth during installation, but I keep getting random BSOD's. I have been googling the error, and I suspect it has something to do with my graphics card driver, but I am pretty sure I have installed the latest driver for it.

Does anyone have a clue what might be wrong?

 

[yowanvista]

Remove TuneUp Utilities, these applications cause more damage than they fix and Windows 7 doesn't need to be 'tuned'
It may have damaged some system files, run the SFC tool http://www.sevenforums.com/tutorials/1538-sfc-scannow-command-system-file-checker.html

TuneUpUtilitiesDriver64.sys        fffff880`09cec000    fffff880`09cf4000    0x00008000    0x4ab2238c    17/09/2009 15:54:52

All dumps indicated that emusba10.sys was the cause, this driver is from E-MU Systems Inc
Update it or remove it
http://www.emu.com/support/

BugCheck 3B, {c0000046, fffff80002cae034, fffff8800962fe50, 0}

Unable to load image \SystemRoot\system32\DRIVERS\emusba10.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for emusba10.sys
*** ERROR: Module load completed but symbols could not be loaded for emusba10.sys
Unable to load image \SystemRoot\system32\DRIVERS\ks.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ks.sys
*** ERROR: Module load completed but symbols could not be loaded for ks.sys
Probably caused by : emusba10.sys ( emusba10+1882a )

If that does not work make a http://www.sevenforums.com/tutorials/700-system-restore.html and load a restore point before Tune Up utilities was installed

 

[Tallang]

Thank you for fast reply!!

I have removed TuneUp as you requested, and are currently running the SFC tool.

The driver from E-MU is on the other hand a driver I really rely on. It drives my external sound card, which I use on a daily basis to produce music. At the support page for E-MU, the only driver I can find (v1.3) works for:
"v1.3 is Windows XP32, XP64, Vista32, Vista64 Compatible only!"

Will this work on my W7 x64?

 

[yowanvista]

Thank you for fast reply!!

I have removed TuneUp as you requested, and are currently running the SFC tool.

The driver from E-MU is on the other hand a driver I really rely on. It drives my external sound card, which I use on a daily basis to produce music. At the support page for E-MU, the only driver I can find (v1.3) works for:
"v1.3 is Windows XP32, XP64, Vista32, Vista64 Compatible only!"

Will this work on my W7 x64?

Seems it doesn't officially support Windows 7, try to install it in http://www.sevenforums.com/tutorials/316-compatibility-mode.html, but if that doesn't work contact the manufacturer for an updated driver

 

[Tallang]

Thank you for fast reply!!

I have removed TuneUp as you requested, and are currently running the SFC tool.

The driver from E-MU is on the other hand a driver I really rely on. It drives my external sound card, which I use on a daily basis to produce music. At the support page for E-MU, the only driver I can find (v1.3) works for:
"v1.3 is Windows XP32, XP64, Vista32, Vista64 Compatible only!"

Will this work on my W7 x64?

Seems it doesn't officially support Windows 7, try to install it in http://www.sevenforums.com/tutorials/316-compatibility-mode.html, but if that doesn't work contact the manufacturer for an updated driver

By installing it in compability mode, you probably mean run the driver in compability mode? In which case, how do i change the compability mode for the driver?

 

[yowanvista]

Thank you for fast reply!!

I have removed TuneUp as you requested, and are currently running the SFC tool.

The driver from E-MU is on the other hand a driver I really rely on. It drives my external sound card, which I use on a daily basis to produce music. At the support page for E-MU, the only driver I can find (v1.3) works for:
"v1.3 is Windows XP32, XP64, Vista32, Vista64 Compatible only!"

Will this work on my W7 x64?

Seems it doesn't officially support Windows 7, try to install it in http://www.sevenforums.com/tutorials/316-compatibility-mode.html, but if that doesn't work contact the manufacturer for an updated driver

By installing it in compability mode, you probably mean run the driver in compability mode? In which case, how do i change the compability mode for the driver?

Run the driver's installer in compatibility mode