Random Bsod

Bill701

New member
Local time
9:37 PM
Messages
5
I have been getting these for a while now. I have run memtest for 10 passes each stick with no errors. I have run hard drive tests and they check out ok. I have updated the drivers for the mainboard/graphics card. Please look over my minidump and see if there is anything obvious. Thank you
 

My Computer

Computer Manufacturer/Model Number
homebuilt
OS
Win7 Home 64bit
CPU
Amd phenom 2 X4 940
Motherboard
Gigabyte GA-MA-790GP-UD4H
Memory
4 gig corsair dominator
Graphics Card(s)
nvidia gtx 260
Sound Card
sb audigy 2
Monitor(s) Displays
samsung 22
Hard Drives
1 WD 1 gig
PSU
550 wat enermax
I have been getting these for a while now. I have run memtest for 10 passes each stick with no errors. I have run hard drive tests and they check out ok. I have updated the drivers for the mainboard/graphics card. Please look over my minidump and see if there is anything obvious. Thank you

All the driver verified DMP's point to your video driver. The others are Related to Gigabyte Easy Energy Saver it's a motherboard utility that manage the power of CPU, fan and may others. Note: Located in \%Program Files%\Gigabyte\EasySaver\.

I would re-install the video driver using these instructions and remove the easy saver .

When upgrading your graphic driver you MUST remove all traces of the current driver. In order to do that we recommend using

Phyxion.net - Driver Sweeper

When it is removed then download and install the fresh copy.
 

My Computer

Computer Manufacturer/Model Number
HP Pavillion dv-7 1005 Tx
OS
Win 8 Release candidate 8400
CPU
[email protected]
Memory
4 gigs
Graphics Card(s)
Nvidia 9600M
Sound Card
HD built-in
Monitor(s) Displays
17" Wxga
Screen Resolution
1440x900
Cooling
none
Internet Speed
45Mb down 5Mb up
Ok heres an update. I reinstalled the video drivers using a driver sweeper as described. It caused a bsod while i was uninstalling them. I removed the easy saver program. The last bsod I was not even at the computer. It crashed then wouldn't boot. It just gave me 4 long beeps which is a memory issue i believe. I rebooted again and all was fine. I have attached the 2 most recent minidumps. I don't know if this matters but my boards default memory voltage is 1.85 but my memory calls for 2.1v I have always bumped this up to 2.1v. Any ideas ,suggstions? Thanks, Bill
 

My Computer

Computer Manufacturer/Model Number
homebuilt
OS
Win7 Home 64bit
CPU
Amd phenom 2 X4 940
Motherboard
Gigabyte GA-MA-790GP-UD4H
Memory
4 gig corsair dominator
Graphics Card(s)
nvidia gtx 260
Sound Card
sb audigy 2
Monitor(s) Displays
samsung 22
Hard Drives
1 WD 1 gig
PSU
550 wat enermax
Back
Top