Solved Random BSODs after flashing my BIOS in windows with MSI Live Update 6

[MorbidWarmage]

I have started experiencing random BSODs after flashing my BIOS with Live Update 6 (LU6), or at least that is the only thing I can think of that could be the cause. The BSOD have happened after a few hours to something closer to 10 hours, while watching youtube to using utorrent. I have no problems up to the BSOD, no errors, no sound flaws or anything like that just a sudden random blue screen. Unfortunatly I only have the report from the utorrent crash. I have gone into the BIOS and reset to standard confics but other than that I have no idea for what to do.

Additional Information
Problemsignatur:
Navn på problemhændelse: BlueScreen
OS-version: 6.1.7601.2.1.0.768.3
Landestandard-id: 1030

Flere oplysninger om problemet:
BCCode: d1
BCP1: 0000000000000000
BCP2: 0000000000000002
BCP3: 0000000000000000
BCP4: FFFFF88005806C8F
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1

Edit

Just had another BSOD while running VLC and utorrent.

Problemsignatur:
Navn på problemhændelse: BlueScreen
OS-version: 6.1.7601.2.1.0.768.3
Landestandard-id: 1030

Flere oplysninger om problemet:
BCCode: d1
BCP1: 0000000000000000
BCP2: 0000000000000002
BCP3: 0000000000000000
BCP4: FFFFF880059B7C8F
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1

 

[SGT Oddball]

*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck D1, {0, 2, 0, fffff880059b7c8f}
*** WARNING: Unable to verify timestamp for e22w7x64.sys
*** ERROR: Module load completed but symbols could not be loaded for e22w7x64.sys
*** WARNING: Unable to verify timestamp for [B]afwcore.sys[/B]
*** ERROR: Module load completed but symbols could not be loaded for [B]afwcore.sys[/B]
Probably caused by : e22w7x64.sys ( e22w7x64+6c8f )
Followup: MachineOwner
---------

The dumps indicate an issue with the driver for your Killer e2200 PCI-E Gigabit Ethernet Controller e22w7x64.sys so see if you can find some updated drivers.

There could also be an issue with AfwCore.sys Agnitum Firewall Driver (outpost Antivirus?), so I'd look at swapping that for Windows firewall and Microsoft security essentials which are completely stable, until you get to the bottom of your BSOD issues.

Driver Reference Table - e22w7x64.sys
Driver Reference Table - AfwCore.sys

 

[MorbidWarmage]

Thanks I'll try that

 

[MorbidWarmage]

So got another BSOD while watching youtube, after reinstalling Bullguard antivirius. So I'll try running it a couple of days without it.