Random BSODs all around

[ctowers200]

There is no real pattern as far as when it happens. Files are attatched

*Edit*
-System specs added to my profile.
-Checked all connections, and everything is seated well.
-SFC showed no errors

 

[marsmimar]

Hello ctowers200 and welcome to Seven Forums.

I'm not a BSOD expert. The experts on this Forum are seriously back-logged helping others. So until one responds to your thread there are a few things to check. First, it would help to know your system specs. Top of each page click User CP and in left column click Edit System Spec. If you aren't sure about the specs a free utility called Speccy will give you everything you need to know.

Speccy - System Information - Free Download

- Make sure your memory sticks, GPU, etc are seated properly
- If using multiple memory sticks test each stick by itself in slot # 1 (or whichever slot the motherboard manufacturer recommends for a single stick)
- After checking each stick, check each slot
- Check your power management options.
- Check your PSU.
- Use default BIOS setting if you overclock

You could also run a system file checker scan from an elevated command prompt (option two.) It will look for damaged or corrupt system files and try to replace them with the correct versions. If problems are found run the scan 3 times rebooting in between each scan.

http://www.sevenforums.com/tutorials/1538-sfc-scannow-command-system-file-checker.html

If still no luck, you could work through these troubleshooting steps prepared by one of the forum experts. It's time consuming but may help isolate the problem.

http://www.sevenforums.com/tutorials/220165-troubleshooting-steps-windows-7-a.html

 

[ctowers200]

I noticed I forgot msinfo32, I re-uploaded the .zip with it included. If there is anything else that it needed let me know

 

[ctowers200]

bump...

 

[ctowers200]

Latest crash info attached

 

[ctowers200]

Iv had 3 crashes over 2 days. Can someone please give me an idea of what is going on?

 

[ctowers200]

Another crash today

 

[ctowers200]

Latest crash dump

 

[ctowers200]

I had another crash this morning, but im not even gonna bother posting it...

I did an extended windows memory diagnostic for 10 passes over night for no errors, im gonna do a memtest tonight as well.

 

[richc46]

Welcome
First let me apologize for your extremely long wait for assistance. Normally, I would not respond to a PM asking for help, but I think your case is an exception. We at the forum take pride in giving the best and fastest help on the net. Somehow your posts got lost.
That being said
Your reports are consistent. Looks like its a hard drive problem or a memory problem
Go to the manufacturer of your hard drive and test the drive.
in addition.
The last 3 reports, all indicate memory. Take a memory test.
Run for 8 passes.
Then test each stick in a good slot for 6 passes.
If you have dual channel, the results may be incorrect, if shows pass.
Guide to using Memtest86+ - Geeks to Go Forums

 

[ctowers200]

So far I have tested the sticks individually over night/the day (8 passes each) with zero errors. I am now running the test for both sticks over night and will report back in the morning.

Something id like to mention I ran a very short test (~90% on the first pass) on both sticks a few days ago and it reported 4 errors. I don't know if this is the inaccurate results you were talking about or if it was legit. I guess we will find out

 

[ctowers200]

8 passes with both sticks gave 6 errors

 

[richc46]

This is what I know. You have memory problems which must be corrected before we go forward if needed . But I think this is your problem

 

[ctowers200]

I have already contacted the manufacturer of the RAM and started a warranty claim, I probably won't get them back for a couple of weeks. I borrowed some sticks from a friend that are in good condition. I will come back if I get another bsod

 

[richc46]

If you get a BSOD and its memory, Id be afraid that its your MB and not the sticks.