Random BSODs happening

[MrBungle]

OK so I have been getting BSOD's for the past few hours. Running Windows 7 Ultimate 64-bit on a Toshiba Satellite laptop. Intel core 2 duo 2.00ghz, 4gb ram. attached a dmp file. Appreciate the help. Thanks

 

[Capt.Jack Sparrow]

OK so I have been getting BSOD's for the past few hours. Running Windows 7 Ultimate 64-bit on a Toshiba Satellite laptop. Intel core 2 duo 2.00ghz, 4gb ram. attached a dmp file. Appreciate the help. Thanks

Hello Welcome to SF,

I guess issues is with you Network adpator i.e. Intel® Wireless WiFi Link Adapter Driver(netw5v64.sys). Uninstall the current driver and download a freash copy from the vendor's website and NOT from Windows update. If your Overclocking please stop. Make sure your BIOS have the latest firmware. If you using any Antivirus or Firewall uninstall it and see whether that makes any difference.

Run the Memory Diagnostic & HD Diagnostic

Also i would recommend to run System Integrity Checker
Start > Run > CMD >Right Click and Run as administrator > SFC/ SCANNOW

Drivers to be updated

TVALZ_O.SYS  Fri Nov 09 08:38:41 2007
SynTP.sys    Fri Dec 07 07:12:03 2007
rixdpx64.sys Sat Nov 18 09:37:46 2006

Bugcheck Analysis

[COLOR=Red][B]

[FONT=Book Antiqua]IRQL_NOT_LESS_OR_EQUAL (a)[/FONT][/B][/COLOR][FONT=Book Antiqua]
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high.  This is usually
caused by drivers using improper addresses.
If a kernel debugger is available get the stack backtrace.
Arguments:
Arg1: 0000000000000000, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, bitfield :
    bit 0 : value 0 = read operation, 1 = write operation
    bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff80002df1477, address which referenced memory

Debugging Details:
------------------


READ_ADDRESS: GetPointerFromAddress: unable to read from fffff80002aba0e0
 0000000000000000 
CURRENT_IRQL:  2
FAULTING_IP: 
hal!HalpDmaNextContiguousPiece+103
fffff800`02df1477 448b08          mov     r9d,dword ptr [rax]
CUSTOMER_CRASH_COUNT:  1
DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT
BUGCHECK_STR:  0xA
PROCESS_NAME:  System
TRAP_FRAME:  fffff88002fd18d0 -- (.trap 0xfffff88002fd18d0)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=0000000000000000 rbx=0000000000000000 rcx=0000000000000aec
rdx=0000000000000aec rsi=0000000000000000 rdi=0000000000000000
rip=fffff80002df1477 rsp=fffff88002fd1a68 rbp=0000000000000000
 r8=000000000000001c  r9=0000000000000000 r10=00000000000fffff
r11=fffffa8005dcfdf0 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0         nv up ei pl nz na pe nc
hal!HalpDmaNextContiguousPiece+0x103:
fffff800`02df1477 448b08          mov     r9d,dword ptr [rax] ds:0001:00000000`00000000=????????
Resetting default scope
LAST_CONTROL_TRANSFER:  from fffff80002883469 to fffff80002883f00
STACK_COMMAND:  kb
FOLLOWUP_IP: 
netw5v64+5b7d
fffff880`04894b7d ??              ???
SYMBOL_STACK_INDEX:  c
SYMBOL_NAME:  netw5v64+5b7d
FOLLOWUP_NAME:  MachineOwner
MODULE_NAME: netw5v64
IMAGE_NAME:  [/FONT][FONT=Book Antiqua][COLOR=Red][B]netw5v64.sys[/B][/COLOR][/FONT][FONT=Book Antiqua]
DEBUG_FLR_IMAGE_TIMESTAMP:  49cbab84
FAILURE_BUCKET_ID:  X64_0xA_netw5v64+5b7d
BUCKET_ID:  X64_0xA_netw5v64+5b7d[/FONT]

Hope this helps,
Captain

 

[MrBungle]

i'll give everything a try and let you know how it goes. thanks so much!

 

[MrBungle]

seems to be good so far. thanks again!

 

[Capt.Jack Sparrow]

seems to be good so far. thanks again!

Your Welcome Mate..!! Let us know in case of issues

- Captain