Random BSODs on a newly assembled computer

[Hatchling]

Hello there,
This is a brand new pc, I bought the parts and had a tech guy assemble and install everything for me. My problem is that either when I play or when I just am not doing anything the computer gives me a BSOD, sometimes it freezes although that rarely happens. I tried reisntalling windows but it did not work. I tried getting help on a forum and have been told it could be a HD issue so I bought a new one and the BSODing continued. I tested my mems with memtest and everything was fine also. I tried setting up the voltage a bit higher because of the RAMs to no avail. I was told after many BSOD minidumps that the problem was Ntoskrnl.exe but there has been no fix as of yet.

 

[Arc]

Hi Hatchling. You are having a wide range of bugcheck codes. No pattern is there. Which may indicate to something serious is going on there.

Install Service pack 1 and all other windows updates. Otherwise the system will remain vulnerable to threats.

[COLOR=Red]Windows 7 Kernel Version 7600 MP[/COLOR] (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255

Learn how to install Windows 7 Service Pack 1 (SP1)
Service Pack Center - Microsoft Windows

The network driver is causing issues there. Update the Realtek network driver from Realtek

The display driver, too. Install the NVIDIA DRIVERS 314.22WHQL only.

• Uninstall All nvidia items in Control Panel > Programs and features
  • 3D Vision Control Driver
  • 3D Vision Driver
  • Graphics Driver
  • HD Audio Driver
  • PhysX
  • nvidia Update
  (Are you using nvidia chipset drivers? If so, dont uninstall anything other than those are listed).
• Now follow Drivers - Clean Left over Files after Uninstalling
• Boot normally now. Go to Drivers - Download NVIDIA Drivers, Download 314.22 WHQL. While installing, Select Custom (Advanced) install. In the next page, follow this settings:
  
  

Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.


Stress test the Graphics Card using Furmark.
Video Card - Stress Test with Furmark

Stress test the CPU.
Hardware - Stress Test With Prime95

Is the computer hot? Report us the heat of the computer after a couple of hours of your normal usage. Upload a screenshot of the summery tab of Speccy.

Check if the Power Supply Unit (PSU) supplying adequate power to the computer or not.
eXtreme Power Supply Calculator

Scan the system for possible virus infection with the following programs.

• Anti-rootkit utility TDSSKiller
• Windows Defender Offline

Seatool for dos: SeaTools | Seagate download

• Burn it in a blank cd. boot from the CD, click on "Accept", wait for it to finish detecting the drives, then in the upper left corner select "Basic Tests", then select "Long Test" and let it run.

Let us know the results.

_________________________________________________________

BugCheck 34, {50830, fffff8800333f858, fffff8800333f0b0, fffff80002cb6c22}

Probably caused by : ntkrnlmp.exe ( nt!KxWaitForLockOwnerShip+12 )

Followup: MachineOwner
---------------------------------------------------------------------
BugCheck 3B, {c0000005, fffff80002d07c22, fffff8800a7b6150, 0}

***** Debugger could not find nt in module list, module list might be corrupt, error 0x80070057.

Probably caused by : Unknown_Image ( ANALYSIS_INCONCLUSIVE )

Followup: MachineOwner
----------------------------------------------------------------------
BugCheck 124, {0, fffffa800e37b028, b0800000, 40151}

Probably caused by : AuthenticAMD

Followup: MachineOwner
------------------------------------------------------------------------
BugCheck 1000007E, {ffffffffc0000005, fffff80002cffc22, fffff880009a99a8, fffff880009a9200}

Probably caused by : ntkrnlmp.exe ( nt!KxWaitForLockOwnerShip+12 )

Followup: MachineOwner
---------