Random multiple BSOD different error codes

[DroidBoy]

I have stumbled upon this forum as im at the end of the road, for a while i have suffered random bsod at 1st i thought it was graphics driver as my card is outdated but i don't think it is after a while of this happening i decided to fresh install windows thinking this would cure the problem, However the problem persists even now if i could get some help it would be appreciated i have attached my mini dump files thanks for looking.

 

[essenbe]

DroidBoy, I will see if I can give you some help. I assume you have only had 1 BSOD since doing the reinstall of Windows as the files you uploaded only had 1 dump file in it, dated today.

This was the information that dump file provided.

*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck 3B, {c0000005, fffff80002b61c0f, fffff8800a2f6fd0, 0}
Probably caused by :[COLOR=red] memory_corruption[/COLOR] ( nt!MiUnsecureVirtualMemory+15f )
Followup: MachineOwner

Please Run Memtest86+

   Information

Please download from this site only http://www.memtest.org/ in the middle of the page are the Download links, you can download the ISO.zip or the Auto USB Flash Drive installer.zip

Extract the Zip file. If you chose the ISO image, burn it to a CD using Windows Disk Image Burner or any Image burner you may have. If you downloaded the Auto USB installer, extract it, insert your USB 2.0 Flash Drive and take note of the drive letter. Run the installer, select the Flash Drive Letter, check the format box and press next. It will install memtest86+ to a flash drive. You can use either V4.20 or V5.01. Boot from your selected media. If you use V5.01 it will tell you to press certain buttons at the start, please press no buttons. The test will begin on it's own and continue to run until you stop it. It needs to run for 8 complete passes or until you receive an error. If you receive an error, stop the test. Even 1 error is a fail. Each pass tests a different part of the ram and each of the 10 tests in each pass tests something different. It takes a minimum of 8 passes to completely test the ram, more passes are better. It is quite a long test and will take several hours depending on how much ram you have. Due to the time length it is best to run overnight. If you have any questions, please do not hesitate to ask​

 

[essenbe]

Also, please do not use any disk cleanup utilities until we finish. Many of the will clean out Windows Error reporting files which we will need. Also, I see you have filled out your system specs. Could I get you to go through them again and add more specifics. Sometimes we need to look up a particular part you are using. It would be helpful if you provided Manufacturer and Model numbers to the parts such as ram, PSU, and CPU cooler. The case can help in some cases. I would also strongly suggest you install a good anti Virus also. Microsoft security essentials is free, light on resources, and for our purposes here, will not cause a BSOD. It can be downloaded at MSE IE Download - Microsoft Windows . As for the system Specs, this may help you as it is the instructions I always give, even though you have many of them already filled out.
Thanks.

Please fill out your System Specs​

   Information

Your System Specs will help us to help you, and doing it in this manner will make them available to all helpers in every post and keep us from hunting for them. We ask that you fill them out in as much detail as possible including Desktop or Laptop, Model number if it is an OEM computer and all components with the Manufacturer and Model number if possible.

If you will go to your last post and click the 'System Specs' in the bottom left of the post, you will find a link to update your system specs. Please fill those out in as much detail as possible, making sure to click save at the bottom of the page. If you would like to know what we would like, you can click 'My System Specs' at the bottom left of this post to see mine. If you do not know what your components are, this will help you accomplish this task. http://www.sevenforums.com/tutorials/180324-system-info-see-your-system-specs.html​

 

[DroidBoy]

didn't realise it was wrong version take no notice of screens I upped I cant delete running again with version 5.01 will get back to you when finished...thanks for your time in this issue

 

[DroidBoy]

So its been on for a little over 3 hour 30 mins and there is approx. 13312 errors just wondering if I should leave it or try to eliminate the hopefully just 1 faulty stick of ram, you or admins can delete my last post as I couldn't see how to do it bud and am not trying to build posts thanks for your help in this problem friend

 

[essenbe]

Stop the test. Your ram has failed. You have probably found your problem

 

[DroidBoy]

thanks bud I have been testing each 4gb stick separately only 1 stick has failed 2 sticks are going good I put them on another memtest and so far on 2 pass its clean so gunna leave for night but 1 stick is faulty loads of errors thanks so much for your help my friend will pick up some more ram when I can

 

[essenbe]

Piece of advice get it in sets. Sets are tested to work together without errors. Corsair is pretty good at RMA's and they will probably replace it with a set, especially if you ask for it. They have a lifetime warranty on their ram. So, there should be no problems.