Realtek wireless usb internet sharing problem

[k1dr0ck]

anyone able to share internet connection using a realtek wireless usb with an iphone?

i want to make my pc as an access point thru my realtek wireless usb so i can access the internet thru my iphone

 

[Digger]

change your type of connection to Ad-Hoc instead of infrastructure/AP.


This is done by viewing the properties of the usb adapter, configure, advanced tab. the iphone may also need to be switched to ad-hoc mode as well

 

[k1dr0ck]

thanks for the reply...

i changed the network connection of my wireless usb to ad-hoc

there's no option on the iphone to switch to ad-hoc

still no connection

 

[eo3dmachines]

RTL8187 fix for windows7 (Working Version)

i had my RTL8187L working already in windows 7. i found a fix by someone ("msimango")("http://www.sevenforums.com/network-...185-wireless-connection-problem-w7-x64-5.html") who had made it to work with his RTL8185.

what i did was download and installed the windows7 version of the program within the realtek site ("Realtek") then i closed the utility and i changed the 8187.ini with this line below. after editing or replacing the 8187.ini try to run the utility again. it will be ok now

[Country]
AutoSelected=1
xxnCountry=2


[WLan Utility]
WZC=0
RtWLanTitle="REALTEK RTL8187 Wireless LAN Utility"
MANUFACTURER="Realtek"
Model_Name="RTL8187"
NO_Adapter_TEXT1="Realtek Wireless LAN Configuration Utility"
NO_Adapter_TEXT2="Realtek Semiconductor Corp."
NO_Adapter_TEXT3="Copyright (c) 2003-2010"


[UI Config]
ICS_Page_SHOW="1"
MACfilterPage_SHOW="0"
AP_Mode_ENABLE="1"
AP_Mode_WPA_PSK_ENABLE="0"
WPA2_ENABLE="0"
AP_WPA2_ENABLE="0"
WDS_AP_Mode_ENABLE="0"
RT_SET_ENABLE="0"
802_1X_SHOW="1"
Link_ANY_ENABLE="0"
EzConfigPage_SHOW="1"
SimpleConfigPage_SHOW="1"
WiFiProtectSetPage_SHOW="1"
External_Registrar_SHOW="1"
AdvancedPage_SHOW="1"
DbgWnd_SHOW="1"
WLANModeTo90="1"
PowerSave_SHOW="0"
TurboMode_SHOW="1"
WirelessMode_SHOW="1"
PREAMBLE_SHOW="1"
Channel_Plan_SHOW="1"
XLink_SHOW="1"
WMM_SHOW="0"
RTS_Threshold_SHOW="1"
Fragment_Threshold_SHOW="1"
WOL_SHOW="0"
DATA_RATE_SHOW="0"
Throughput_SHOW="0"
VWiFi_SHOW="1"


[98UI Config]
AP_Mode_ENABLE="1"
AP_Mode_WPA_PSK_ENABLE="0"
WPA2_ENABLE="1"
WDS_AP_Mode_ENABLE="0"
RT_SET_ENABLE="1"
802_1X_SHOW="1"
EzConfigPage_SHOW="1"
SimpleConfigPage_SHOW="1"
WiFiProtectSetPage_SHOW="1"
PowerSave_SHOW="1"
TurboMode_SHOW="1"
WirelessMode_SHOW="1"
PREAMBLE_SHOW="1"
Channel_Plan_SHOW="1"
XLink_SHOW="1"
WMM_SHOW="1"
RTS_Threshold_SHOW="1"
Fragment_Threshold_SHOW="1"
WOL_SHOW="0"
DATA_RATE_SHOW="0"



for those with other model chips like the RTL8185. look for the 8185.ini then use the lines above. just dont forget to change the 8187 to 8185 part in the RtWLanTitle and Model_Name. so you wont get confused with your part number everytime you look at its utility.

[WLan Utility]
WZC=0
RtWLanTitle="REALTEK RTL8185 Wireless LAN Utility"
MANUFACTURER="Realtek"
Model_Name="RTL8185"

 

[k1dr0ck]

thanks! got it to work on windows 7

 

[ksamad]

RTL8187 fix for windows7 (Working Version)

Yes its working fine, but i have one issue, the Internet Connection Sharing is not giving Automatic IP Address I have to assign manually to the device ( mobile )