This is my first ever post here on this forum so sorry if my info is less than you need.
So the problem is that every time i reboot my computer i get "reboot and select proper boot device. Or insert boot media in selected boot device and press a key" on the screen. I have been in the bios and check that the boot order is correct and it is but sometimes my HDD comes up as "??" device.
Usually it helps to reboot the device many times and / or reinsert the SATA cables but I wish i did not have to open my case every morning to fix the issues. But once it has booted into windows I have no problems until the next reboot.
I am an IT student on the final year so my experience tells me that there is a problem with the SATA cable or boot block of Bios but I would love to get someone else's opinion
--TP92
My Computer
At a glance
Windows 10 Pro x64Intel Core i7-4770K CPU @ 3.50GHzKingston DDR3 1333MHz 16GB CL9MSI GeForce GTX 970 Gaming 4GB
I'd say a new cable would be the cheapest route to take first
Disconnect any additional internal drives.
My Computer
At a glance
Win-7-Pro64bit 7-H-Prem-64biti7-5930K 2nd i9-9940x both water blocked VRM'...Trident-z 3200C14 2nd Trident-z 3600C16EVGA 1080ti ftw3 2nd Titan Xp both water blocked
Computer type
PC/Desktop
Computer Manufacturer/Model Number
Custom assembled by me :}
OS
Win-7-Pro64bit 7-H-Prem-64bit
CPU
i7-5930K 2nd i9-9940x both water blocked VRM's too
2nd ASUS X299 Apex/Intel i9-9940x with Custom water loop/7H-Prem-x64/Corsair 450D case/Ram Trident-z 3600C16 4x8gb / Samsung970Evo plus 500gb SSD/Dual ssd EZ swap evo/PSU EVGA SuperNova 1200w-P2 80+Platinum/GPU Titan Xp /8-ML-140 on push-pull on 2-280GTX rads
I have the correct settings in Bios so it will try the Bootable HDD first. I've tried disconnecting ever other drive but still get the same message when I try to boot.
My Computer
At a glance
Windows 10 Pro x64Intel Core i7-4770K CPU @ 3.50GHzKingston DDR3 1333MHz 16GB CL9MSI GeForce GTX 970 Gaming 4GB
