"Reboot and Select proper Boot device" with only 1 data drive

chopp nz

New member
Local time
11:52 AM
Messages
14
"Reboot and Select proper Boot device" with only 1 data drive

Hello,

So a while ago my computer crashed and I wasn't sure what it was so I tried many things because I wasn't getting any BIOS beeps so I thought it was the motherboard but long story short it's the graphics card, so I've replaced that with my old one for now. But since I took out so many parts so many times I keep getting the

"Reboot and Select proper Boot device" error.
I have a Motherboards - P8P67 LE - ASUS

And I've set the SSD to the primary boot, I've tried to directly boot it via BIOS but they both still give the same result, I've put the Win7 disk in and done a repair but still, no change.

Since my OS is installed to my SSD, is there a chance it could have corrupted the files or the actual drive when the computer crashed? From what I heard SSD's seem to be a bit fragile.

Any help or recommendations would greatly appreciated.

Thank you.
 

My Computer My Computer

At a glance

Windows 7 Ultimate x64Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz (4 C...6144MB RAMATI Radeon HD 4800 Series
Computer type
PC/Desktop
Computer Manufacturer/Model Number
Custom
OS
Windows 7 Ultimate x64
CPU
Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz (4 CPUs), ~3.3GHz
Motherboard
Asus P8P67 LE
Memory
6144MB RAM
Graphics Card(s)
ATI Radeon HD 4800 Series
Sound Card
Realtek Digital Output (Realtek High Definition Audio)
Screen Resolution
1920*1080
Hard Drives
64 Gig OCZ - Vertex 4 SSD
Generic 1TB HDD
How many times have you tried startup repair ?

It may take 3 attempts.
 

My Computer My Computer

At a glance

Windows 10 Pro x64Intel Core i7 6700KGSkill TridentZ RGB 16GB 3600 16-16-16-36EVGA GTX 980 Ti SC x2
Computer type
PC/Desktop
Computer Manufacturer/Model Number
Skylake Special #666
OS
Windows 10 Pro x64
CPU
Intel Core i7 6700K
Motherboard
Asus Sabertooth Z170 Mark 1
Memory
GSkill TridentZ RGB 16GB 3600 16-16-16-36
Graphics Card(s)
EVGA GTX 980 Ti SC x2
Sound Card
Realtek High Definition
Monitor(s) Displays
AOC G2460PG
Screen Resolution
1920 x 1080 144Hz
Hard Drives
Samsung 860 Pro 256GB, Seagate Barracuda 4TB x2
PSU
EVGA 1000 P2, EVGA White Custom Braided Cables
Case
Corsair Vengeance C70 Gunmetal Black
Cooling
Corsair H100i v2, Corsair ML120 x2, Thermal Grizzly Kryonaut
Keyboard
Logitech G910 Orion Spectrum
Mouse
Logitech G700s
Internet Speed
Verizon Fios Quantum Gateway 75/75
Antivirus
Windows Defender, Malwarebytes Free 3.8.3
Browser
Chrome
Other Info
Corsair SP120 x4, LG Blu-ray Drive, Durabrand HT-395 100 Watt Dolby Digital Amp, Corsair H2100 Wireless 7.1 Headset
You'll also need to confirm that the 100mb System Reserved (preferred if you have it) or C is Partition Marked Active before the repairs will work. Unplug all other drives and peripherals.

If this fails start at the top of the steps for Troubleshooting Windows 7 Failure to Start.

When you get to the steps involving Partition Wizard boot disk, post back if you can a camera shot of PW drive map showing all listings columns. This will tell us a lot.
 
Back
Top