Receiving Blue Screen Lately. Looking for answers here. Thanks

[Knightlight]

BSOD issues looking for answers here. Thanks

Below I've attached my DM Log Collector if someone could look over the logs and help me identify the issue i would really appreciate it.

View attachment 374284​

 

[axe0]

Hi Knightlight,

Welcome to the 7forums.

There are a few 0x1A(MEMORY_MANAGEMENT) which are caused by either the memory or drivers.
There is a 0x51(REGISTRY_ERROR), this can, to my knowledge, only be fixed with checking the system files.
There is a 0x24(NTFS_FILE_SYSTEM) which indicates hard drive problems.
Please follow instructions below

In some crashes, the Intel Graphics display driver has been flagged.
Please uninstall everything of Intel using Display Driver Uninstaller and install new drivers from Intel

*** WARNING: Unable to verify timestamp for igdkmd64.sys
*** ERROR: Module load completed but symbols could not be loaded for igdkmd64.sys
0: kd> lmvm igdkmd64
start             end                 module name
fffff880`0481a000 fffff880`053d7d60   igdkmd64 T (no symbols)           
    Loaded symbol image file: igdkmd64.sys
    Image path: \SystemRoot\system32\DRIVERS\igdkmd64.sys
    Image name: igdkmd64.sys
    Timestamp:        [COLOR="Red"]Tue Jan 10 23:28:09 2012[/COLOR] (4F0CBB79)
    CheckSum:         00BC541D
    ImageSize:        00BBDD60
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4

Please try following:

• Open an admin command prompt
• Copy/paste "sfc/scannow" (without quotes) and press enter
• When it finished reboot your system
• Open again an admin command prompt
• Enter sfc/scannow again

If sfc/scannow does NOT say "Windows Resource Protection did not find any integrity violation", please upload the cbs.log file located at {windows partition}\Windows\Logs\CBS\, if the file is too large try a 3rd party uploader like dropbox, onedrive, google drive, mediafire etc.
System File Check(SFC a.k.a. Windows Resource Protection) needs to have your system rebooted in order for sfc to try to fix the problems that it finds.

Diagnostic Test

 RAM TEST

Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 7 Forums

   Note

MemTest86+ needs to be run for at least 8 passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.

Diagnostics Test

 HDD TEST

Run SeaTools to check the integrity of your HDD. http://www.sevenforums.com/tutorials/313457-seatools-dos-windows-how-use.html

   Note

Do not run SeaTools on an SSD as the results will be invalid.

Run chkdsk http://www.sevenforums.com/tutorials/433-disk-check.html