remote desktop conn

[chinga69]

hi when you connect with rdc what symbol or character do i use between the two ip addresses to separate them.
i have searched hi and low and cant find anything.
the first ip addy is my isp assigned address then the second is my puter on the network that i want to connect to

222.222.2.8 ? 192.168.50.50
i dont know the character that i need to separate the 2


cheers brad

 

[NosferatuX]

Hi chinga69,

I've been a long time RDC user and I've never encountered entering dual IP addresses to connect to a computer behind a router.

To access a single computer behind a router;
Configure your router for port forwarding to port 3389
Now in RDC just type the IP address supplied by your ISP

If you have multiple computers behind a router;
You have to configure each computer to listen to different ports to avoid conflicts by changing the registry key in HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\TerminalServer\WinStations\RDP-Tcp\PortNumber
The suggested ports to choose to avoid conflict with other programs on the computer should be between 49152 and 65535
Now take that number you've chosen your computer to listen to and configure your router to port forward to that number
In RDC, your format will now be ISPIPAddressortNumber (ex. 222.222.2.8:1234) to connect to that specific computer behind the router

Important: If you have a firewall software running, that has to be configured to allow communication to the port you opened in your router as well.

Note: The above steps assumes that you're not part of a domain as well as the computer you're trying to connect to.

Hope this helps

 

[chinga69]

Hi chinga69,

I've been a long time RDC user and I've never encountered entering dual IP addresses to connect to a computer behind a router.

To access a single computer behind a router;
Configure your router for port forwarding to port 3389
Now in RDC just type the IP address supplied by your ISP

If you have multiple computers behind a router;
You have to configure each computer to listen to different ports to avoid conflicts by changing the registry key in HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\TerminalServer\WinStations\RDP-Tcp\PortNumber
The suggested ports to choose to avoid conflict with other programs on the computer should be between 49152 and 65535
Now take that number you've chosen your computer to listen to and configure your router to port forward to that number
In RDC, your format will now be ISPIPAddressortNumber (ex. 222.222.2.8:1234) to connect to that specific computer behind the router

Important: If you have a firewall software running, that has to be configured to allow communication to the port you opened in your router as well.

Note: The above steps assumes that you're not part of a domain as well as the computer you're trying to connect to.

Hope this helps

thanks very much will give it a go

cheers brad

 

[NosferatuX]

You're most welcome!

Please let us know how this works out for yah or if you need further information

 

[chinga69]

ok so i can connect locally over my network but when i try to use the ip addy from isp i cant connect.
i assume i should be able to use one of my networked puters and use the isp ip addy to try and connect to the puter i want to on my network if that makes sense

cheers brad

 

[NosferatuX]

Ok. Here's the thing... If all of the computers you want to remote access belong to the same network (i.e. same IP range and subnet) as well as the computer you want to use to access them, all you need to place in RDC is their IP address or their computer name without the need to assign different listening ports.

Now, if you want to test if you can access them from behind the router, the computer you need to use needs to have an Internet IP address and should be accessed from outside of the local network. There are several ways to achieve this, the obvious one would be to use an external internet connection from outside of the network (i.e. an internet cafe or a wireless hot spot), Dial-up connection or you can setup another router with its own internet connection and and plugging from there isolated from the local network, though in this case, you'll need to configure individual listening ports for each computer you'll want to access, if its only one computer, there's no need for it.

I hope I was able to answer your question

 

[chinga69]

Ok. Here's the thing... If all of the computers you want to remote access belong to the same network (i.e. same IP range and subnet) as well as the computer you want to use to access them, all you need to place in RDC is their IP address or their computer name without the need to assign different listening ports.

Now, if you want to test if you can access them from behind the router, the computer you need to use needs to have an Internet IP address and should be accessed from outside of the local network. There are several ways to achieve this, the obvious one would be to use an external internet connection from outside of the network (i.e. an internet cafe or a wireless hot spot), Dial-up connection or you can setup another router with its own internet connection and and plugging from there isolated from the local network, though in this case, you'll need to configure individual listening ports for each computer you'll want to access, if its only one computer, there's no need for it.

I hope I was able to answer your question

i can access them locally
i want to see if what i set up will work externally ie i have set up the port for the one i want to access externally so now i need to see if it will work and i am using the isp assigned ip addy and the port from one of my other puters but it looks like it cant access the outside world and come back again guess ill have to wait and try from work tonight

cheers brad

 

[NosferatuX]

Great! Will be waiting for the results of your test

 

[chinga69]

no go still cant connect i setup 2 of the puters the way you described and still wont connect
i can ping the ip and it seems ok no lost packets

cheers brad

 

[chinga69]

ok so i got the win7 laptop to work
must be a setting in vista machine

thanks for the help NosferatuX much appreciated you should add your how to to the tutorials section


cheers brad

 

[NosferatuX]

I'm very happy to hear it Brad!

I was actually preparing to dish out more steps you might be able to try and resolve your connectivity difficulties and spent most of my day testing and verifying steps to make sure everything is working and coming out with test procedures to assist you with your connectivity.

Cheers

 

[Barman58]

Hi NosferatuX,

Sounds like you have more info to add to a tutorial

 

[NosferatuX]

Thanks! I'll try to organize this a bit and send it over

 

[chinga69]

I'm very happy to hear it Brad!

I was actually preparing to dish out more steps you might be able to try and resolve your connectivity difficulties and spent most of my day testing and verifying steps to make sure everything is working and coming out with test procedures to assist you with your connectivity.

Cheers

thanks for the help i might still need them as vista64 still doesn't work changed some more settings and will try again tonight

cheers brad

 

[NosferatuX]

Cool. Let me know how it turns out

 

[NosferatuX]

Hi Brad and Nigel,

With your encouragements, the tutorial has been posted here. Thank you
Shawn adjusted the formatting and feel so, it now looks great!

Note: There are some considerations/issues to make RDC work for W7 to Vista, W7 to XP and vice versa. Just let me know if you encounter any difficulties.

 

[chinga69]

Hi Brad and Nigel,

With your encouragements, the tutorial has been posted here. Thank you
Shawn adjusted the formatting and feel so, it now looks great!

Note: There are some considerations/issues to make RDC work for W7 to Vista, W7 to XP and vice versa. Just let me know if you encounter any difficulties.

hi and thanks
i have xp to win7 working
still cant get xp to vista64 going will read your tut over the weekend and try again monday night

cheers brad

 

[NosferatuX]

hi and thanks
i have xp to win7 working
still cant get xp to vista64 going will read your tut over the weekend and try again monday night

cheers brad

Please install Remote Desktop Connection (Terminal Services Client 6.0) for Windows XP (KB925876)

This version of Remote Desktop Connection can be installed on client computers running Windows XP Service Pack 2. It can be used to connect to remote desktops running earlier versions of Windows, but the new features are available only when the remote computer is running Windows Vista.

Note: You cannot use Remote Desktop Connection to connect to computers running Windows Vista Starter, Windows Vista Home Basic, Windows Vista Home Basic N, or Windows Vista Home Premium, and you can only create outgoing connections from those editions of Windows Vista. If incidentally, you're trying to connect to one of these, let me know and I'll provide the workaround

 

[chinga69]

wont install says the service pack you are running is newer than this file

cheers brad

ps no its vista 64 ultimate crazy part is i can connect to them all at home

 

[chinga69]

i have another vista64 ultimate machine that i will enable on the weekend and try that one monday night as well
its a real pain i cant test from home when i make the changes.
i have tried using the isp provided ip address from a home xp machine to the win7 machine but it cant connect i asume its because it knows its coming from the same ip addy

cheers brad