Repeated BSOD, not sure what's the problem

[applemango]

I've been having multiple blue screen of death. I tried doing a system recovery, but it is still occurring. I'm not sure what's wrong since I'm not tech savvy. I used the computer yesterday and everything was fine.

 

[Arc]

Post it following the Blue Screen of Death (BSOD) Posting Instructions.

 

[applemango]

So I finished doing step 1 of the instructions and I was moving on to step 2. I have a hp pavilion p6510f. I was sliding down the thing on the system unit because since the BSOD occurs repeatedly and it makes my computer start up again, I was going to use usb drive to put the information on the forum using my laptop. It made a high pitch noise and my computer froze.

 

[applemango]

Sorry, to post again. But I was finally able to move to step 2 and when I put the USB drive in my computer, the screen froze. I had to pressed the power button to turn it off, and when I turned it back on, the screen is now black and nothing appears. What should I do now?

 

[Arc]

Scan the system for possible virus infection.

• Windows Defender Offline

When done, if it does not boot properly, follow it:
Troubleshooting Windows 7 Failure to Start

Or, run Startup Repair for three separate times, with restarts after every single run.
Startup Repair: Run three separate times.

 

[applemango]

I don't think it's a virus because I have Norton 360 and when I was able to, I ran a scan and it didn't find anything. Now when I turn on my computer, the screen is black and then it says no signal.

 

[Northernsoul55]

Hi,

Can you boot into advanced boot options?

:ar: http://www.sevenforums.com/tutorials/666-advanced-boot-options.html

If you can please select "Last known Good Configuration" and reboot.

If that does not allow you to boot into windows normally please try booting into Safe-mode:

:ar: http://www.sevenforums.com/tutorials/69585-safe-mode.html

If you can boot into safe-mode follow Arc's sound advice and scan for viruses using WDO:

:ar: http://www.sevenforums.com/tutorials/166445-windows-defender-offline.html

Let me know the outcome.

Cheers

Dave

 

[applemango]

I can't do anything. When I turn it on the screen it just black and it says no signal. I'm not sure what I can actually do.

 

[Arc]

I can't do anything. When I turn it on the screen it just black and it says no signal. I'm not sure what I can actually do.

First check the power connections. Are they placed properly?
Then, observe if the PSU is working or not. If not, you may need to replace the PSU.