RSTRUI.EXE Memory 0xfbb313 / 0xc000000f - Followed instructions 7forum

[TonyJS317]

http://www.sevenforums.com/hardware-devices/296160-hard-disk-smart-status-bad-western-digital.html

I followed the instructions of someone here. Trying to recover data from a broken HD. Plugging in the HD in question while the computer was booted caused the CPU to freeze. This required a cold reboot, I did it 2 times The following errors are what I received on 2nd try. I AM NOT remotely blaming anyone for the error, I am just laying out a time frame. The broken HD is now removed from the equation. Could these new errors be related, does anyone have thoughts:

When I try to boot the computer:
"Windows failed to start hardware change might be cause" (I did change hardware to some degree I added the broken drive to the equation)
Status 0xc000000f
---------------------
When trying to recover using any restore point:
Rstrui.exe 0xfbb313 referenced at 0x05359a58. The memory could not be written.
----------
I ran:
MEMTest 86 V4.00 (NOT Done Yet):
Duration: 2hr 29 min
Processor AMD Phenom II x4 (Quad) 955
Ram400 MHZ DDR800/cas 6-6-6 -18 DDR2 128b
12k reserved
TEST: Std
Memory: e820
ECC: off
Different Cache Levels are Listed L1, 2 & 3 does this info help?
PASS 3 - errors found 0
I do not know how much longer it has left. It has done 3 rounds.

MY Next step UNLESS someone has better advice is to do an HD CHECK I can load the broken CD at DOS prompt. I have not tried Safe MODE :sarc:

Thank You in advance. More than ONCE individuals here have assisted me.

 

[ICIT2LOL]

Tony th memtest which one are you using and using the right one you have to do at least 8 passes mate preferably overnight unless the errors start popping up straight away.

NEW !! Memtest86+ 5.00 RC1 available ! Need betatesters !-!

But before you do this try this if you haven't already http://www.sevenforums.com/tutorials/1538-sfc-scannow-command-system-file-checker.html
and http://www.sevenforums.com/tutorials/433-disk-check.html

then look through this might be off help http://www.sevenforums.com/tutorials/220165-troubleshooting-steps-windows-7-a.html

Plus some scans if you haven't already

http://www.superantispyware.com/

http://www.malwarebytes.org/products/malwarebytes_free/ untick thetrial version box

http://www.bleepingcomputer.com/download/adwcleaner/ download frombleeping computer

DRive tests try Seatools SeaTools for Windows | Seagate

and a surface test with Best Free Partition Manager Freeware and free partition magic for Windows 7, Windows 8, Windows Vista and Windows XP 32 bit & 64 bit. MiniTool Free Partition Manager Software Home Edition.

click on drive then pick surface test. (Handy tool to keep mate for most jobs with eh drives)