SFC/Scannow errors

[willburstyle06]

I'm having trouble installing Windows 7 Service Pack 1 KB976932, after downloading the update on reboot it says updated failed and reverts changes. I ran a SFC/Scannow command and the following two errors came up as un-fixable.

2013-10-04 23:16:21, Info CSI 0000003d [SR] Beginning Verify and Repair transaction
2013-10-04 23:16:21, Info CSI 0000003f [SR] Cannot repair member file [l:18{9}]"bfsvc.exe" of Microsoft-Windows-BootEnvironment-Servicing, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2013-10-04 23:16:22, Info CSI 00000042 [SR] Cannot repair member file [l:18{9}]"bfsvc.exe" of Microsoft-Windows-BootEnvironment-Servicing, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2013-10-04 23:16:22, Info CSI 00000043 [SR] This component was referenced by [l:202{101}]"Microsoft-Windows-Foundation-Package~31bf3856ad364e35~amd64~~6.1.7600.16385.WindowsFoundationDelivery"
2013-10-04 23:16:22, Info CSI 00000046 [SR] Could not reproject corrupted file [ml:520{260},l:28{14}]"\??\C:\Windows"\[l:18{9}]"bfsvc.exe"; source file in store is also corrupted
2013-10-04 23:16:22, Info CSI 00000048 [SR] Verify complete






2013-10-04 23:17:38, Info CSI 00000156 [SR] Beginning Verify and Repair transaction
2013-10-04 23:17:38, Info CSI 00000158 [SR] Cannot repair member file [l:26{13}]"fveupdate.exe" of Microsoft-Windows-SecureStartup-BootServicing-Utility, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2013-10-04 23:17:38, Info CSI 0000015a [SR] Cannot repair member file [l:26{13}]"fveupdate.exe" of Microsoft-Windows-SecureStartup-BootServicing-Utility, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2013-10-04 23:17:38, Info CSI 0000015b [SR] This component was referenced by [l:202{101}]"Microsoft-Windows-Foundation-Package~31bf3856ad364e35~amd64~~6.1.7600.16385.WindowsFoundationDelivery"
2013-10-04 23:17:38, Info CSI 0000015e [SR] Could not reproject corrupted file [ml:520{260},l:28{14}]"\??\C:\Windows"\[l:26{13}]"fveupdate.exe"; source file in store is also corrupted
2013-10-04 23:17:39, Info CSI 00000160 [SR] Verify complete






These errors were in the sfcdetails notepad created. Any ideas how to fix them.

 

[MilesAhead]

Do you have a Restore Point previous to the one made by the SP install? If that doesn't work you may have to do a repair install.

edit: if possible I would make a backup image to an external drive first. Always set up if you can to get back to where you are currently. Otherwise you can go down a slippery slope until the system is unusable. Hopefully not but it's good to be prepared with a bail out strategy.

 

[willburstyle06]

I was hoping to be able to replace these two files fveupdate.exe and bfsve.exe from another clean windows version. Can anyone tell me what those two files are? I'm pretty sure they are related to my inability to install windows servicepack1

 

[willburstyle06]

I was able to repair the fveupdate.exe by replacing it in the command line by and extracted fveupdate.exe file from an windows 7 dvd. The bfsve.exe file even after being replaced was still corrupt. I ran sfc/scannow and only the bfsve.exe error is left. Can someone please tell me what the bfsve.exe file is and how to fix it?