Show us your Unigine Heaven benchmark scores!

[paulstung]

Here is my first attempt at oc'ing with my Sapphire hd7850.It's at 1151 core and 1275 for the memory,it could probably,it has gone higher but it handles thew lower settings a bit better.My cpu is oc'd to 4.4 too.

 

[loot55]

Hello everyone here is my score running Three 5870's my Pc was built in Feb 2010. Don't think I'm going to upgrade anytime soon and put it off for another year.

Tri Crossfire 5870's

 

[Bungee18]

Hi guys,
I finally got my new card working in crossfire.
Here's my first post in this thread.
I'm not sure if the scores are good or bad.

No OC on the cards, everything set to max in the benchamrk.
Are these numbers OK?
Thanks,

J

 

[ganjiry]

Nice 1 Bungee. Glad you got them working mate.
I think your score's good chap

 

[Bungee18]

Thank you Ganjiry.
Is the score right for my rig? I cannot find a good reference for comparison.
Cheers!
J

 

[Solarstarshines]

Hi guys,
I finally got my new card working in crossfire.
Here's my first post in this thread.
I'm not sure if the scores are good or bad.

No OC on the cards, everything set to max in the benchamrk.
Are these numbers OK?
Thanks,

J

Very nice

 

[ganjiry]

Thank you Ganjiry.
Is the score right for my rig? I cannot find a good reference for comparison.
Cheers!
J

yes mate i think its sound. I don't score much more than that on my rig which is a similar setup. No doubt you will have to have a play and may get even better score's
I don't think you have anything to worry about. You got yourself a decent rig there mate now enjoy it
Good job!

 

[paulpicks21]

Great score bungee, looks spot on to me mate!

 

[Bungee18]

Solar, Gangijiry, Paul,
Thank you very much.
I just finished a brief BF3 and FarCry 3 session. It's become so smooth!
Cheers!
J

 

[essenbe]

Nice scores, Bungee. Glad you have them both working. Looks like you will be very happy with those results. Well done.

 

[Bungee18]

Thank you Steve.

I know this is not the right place for this question and I have already started a new thread about it, but since I'm here I might as well ask.
I'm having issues with 3D Mark 11 Physics benchmarks. I can only achieve like 3-5 fps with new rig, whereas I used to get 20-25 with old setup (FX8120 4.3GHz, Asus M5a97 Evo, single 7850). I get very good fps in all other tests.
Can it be related to PCI-E voltages or frequencies set in BIOS? DirectX installation, Physics runtime?
I would very much appreciate your advice.
Cheers,
J

 

[essenbe]

Bungee, I am the wrong person to help with that. Truthfully I don't know. Paulpicks would probably be much better than me. It has always been my understanding that if you have an AMD card which has a work around for it, but no direct PhysX, the test runs off of your CPU. But, your CPU should get you much higher scores than that. So, I really can't tell you much about it, and what I said is most likely wrong.

 

[Bungee18]

OK, so I OC'ed the cards to 1150/1350 with TriXX.
Everything set to max/high/extreme in benchmark.
These are the results (no OC and OC)
Any advice on OC'ing these cards? Optimum settings?
Thanks,
J

 

[paulpicks21]

Bungee, I am the wrong person to help with that. Truthfully I don't know. Paulpicks would probably be much better than me. It has always been my understanding that if you have an AMD card which has a work around for it, but no direct PhysX, the test runs off of your CPU. But, your CPU should get you much higher scores than that. So, I really can't tell you much about it, and what I said is most likely wrong.

Steve, the physics test in 3D Mark 11 is not the same as PhysX (Nvidia). The physics test in 3D mark is based purely on the CPU, I get exactly the same score/fps with my amd gpu as I did with my nvidia as it's not related to the gpu at all.

I am unsure why bungee would only be getting 3-5fps for his CPU though, it is very low, mine is around 34fps and he said his old setup was 20-25 which sounds about right.

 

[paulpicks21]

OK, so I OC'ed the cards to 1150/1350 with TriXX.
Everything set to max/high/extreme in benchmark.
These are the results (no OC and OC)
Any advice on OC'ing these cards? Optimum settings?
Thanks,
J

That's a real good score with the oc bungee, a lot of it is down to the resolution of your monitor though, its hard to compare realistically as most scores are on a 1920x1080, what's the stock core and memory speed on the cards?

 

[Bungee18]

OK, so I OC'ed the cards to 1150/1350 with TriXX.
Everything set to max/high/extreme in benchmark.
These are the results (no OC and OC)
Any advice on OC'ing these cards? Optimum settings?
Thanks,
J

That's a real good score with the oc bungee, a lot of it is down to the resolution of your monitor though, its hard to compare realistically as most scores are on a 1920x1080, what's the stock core and memory speed on the cards?

Thank you Paul.
Stock core: 920
Stock memory: 1250

 

[paulpicks21]

OK, so I OC'ed the cards to 1150/1350 with TriXX.
Everything set to max/high/extreme in benchmark.
These are the results (no OC and OC)
Any advice on OC'ing these cards? Optimum settings?
Thanks,
J

That's a real good score with the oc bungee, a lot of it is down to the resolution of your monitor though, its hard to compare realistically as most scores are on a 1920x1080, what's the stock core and memory speed on the cards?

Thank you Paul.
Stock core: 920
Stock memory: 1250

The core overclock is pretty high already, my card is 1050 stock and I only managed 1200 out of it, a 150mhz increase, you are at 230mhz increase already, I would imagine you are pretty much at the limit.

The memory oc, I managed 200mhz increase so you might be able to push that a little more, but to be honest it won't make much difference in the benchmarks.

Paul.

 

[Bungee18]

Thanks Paul!

 

[Bungee18]

I need some advice here guys, again...
After many frustrating attempts at getting some logical results in the 3D Mark 11 Physics an Combined tests, I tried running them without a CPU OC (BIOS optimized defaults). To mo surprise I was able to get 21 FPS in Physics and 28 FPS in Combined, while I was getting 3-6 FPS when CPU was overclocked...
WEI dropped, of course.
I'm very confused. What is it that could be wrong with my overclock that may be affecting performance in these benchmarks?
Any advice, tips?
Thanks,

Jay

 

[Solarstarshines]

Bungee you are driving yourself crazy for one program that may have a minor glitch that is giving you bad results

3d mark would crash on me all the time on that test with my old cpu overclocked or not but the funny thing is i ran it the first time it went through like nothing

I wouldn't worry about it the performance is there it is just a benchmark numbers don't mean anything vs it's real purpose