Show us your Unigine Heaven benchmark scores!

[ganjiry]

There's plenty of room between the cards mate, It's just the coolers on these cards are crap. I thought about repasting them but doubt it would make a difference as every comment i've seen online about these card's to moan about the cooler's performance. They're compared to stock EVGA cooler's which apparantly do a slightly better job.
I've switched the direction of my H100i as the heat from the cards was going through the rad hindering the cpu cooling. There's also a 200 mm Bitfenix Spectre Pro @70% blowing straight at them. I may try it as exhaust and see if it helps.
Currently i have the H100i pushing air from outside through the rad, Rear 120 mm exhaust, x2 Stock Corsair 120's front intake and 200 Bitfenix intake.
I'll also add the bottom 120 back in as intake.

 

[Dude]

Ryan, the dreaded 70 degree throttle is only 13 mhz if I remember right so I would stick with sli, and maybe take some breaks in between rounds. I think your new sig looks great!

 

[ganjiry]

Ryan, the dreaded 70 degree throttle is only 13 mhz if I remember right so I would stick with sli, and maybe take some breaks in between rounds.

Yeah i know chap but really they should be more than capable of cooling themselves at stock. My case temps are never over 30c and there is tonne's of air around them. Luckily i knew to use a software to up the fan speed but what about those that don't know any better? I don't think the stock fan profile goes over 50% if that.
I just alt tab between rounds in BF3 I've kept the back door open while playing tonight, tis not good.

I think your new sig looks great!

Cheers chap, I didn't make it though as i'm hopelss with any kind of image,video or audio editing.

 

[Dude]

Ryan, the dreaded 70 degree throttle is only 13 mhz if I remember right so I would stick with sli, and maybe take some breaks in between rounds.

Yeah i know chap but really they should be more than capable of cooling themselves at stock. My case temps are never over 30c and there is tonne's of air around them. Luckily i knew to use a software to up the fan speed but what about those that don't know any better? I don't think the stock fan profile goes over 50% if that.
I just alt tab between rounds in BF3 I've kept the back door open while playing tonight, tis not good.

I think your new sig looks great!

Cheers chap, I didn't make it though as i'm hopelss with any kind of image,video or audio editing.

Maybe adding some vram heatsinks might help, not sure if that would help

 

[Solarstarshines]

Weird scores but high frames on regular res ?

:sarc: Beta driver 13.6

 

[Solarstarshines]

There's plenty of room between the cards mate, It's just the coolers on these cards are crap. I thought about repasting them but doubt it would make a difference as every comment i've seen online about these card's to moan about the cooler's performance. They're compared to stock EVGA cooler's which apparantly do a slightly better job.
I've switched the direction of my H100i as the heat from the cards was going through the rad hindering the cpu cooling. There's also a 200 mm Bitfenix Spectre Pro @70% blowing straight at them. I may try it as exhaust and see if it helps.
Currently i have the H100i pushing air from outside through the rad, Rear 120 mm exhaust, x2 Stock Corsair 120's front intake and 200 Bitfenix exhaust.
I'll also add the bottom 120 back in as intake.

Those are some nice looking Palit cards there pal

 

[ganjiry]

Maybe adding some vram heatsinks might help, not sure if that would help

There aren't any memory chips on the back of the cards chap.
Cheer's for the suggestion though

Weird scores but high frames on regular res ?

:sarc: Beta driver 13.6

Bit of a drop from the previous driver enit chap.

Those are some nice looking Palit cards there pal

Cheers chap

 

[smarteyeball]

There's plenty of room between the cards mate, It's just the coolers on these cards are crap.

Unfortunately most of the two fan coolers on high end cards are pretty poor. And Palit aren't renowned for awesome.

Still, I'd rather be worrying about 70c than me at 90c

And I can't OC my cards any more in TRi.

 

[ganjiry]

There's plenty of room between the cards mate, It's just the coolers on these cards are crap.

Unfortunately most of the two fan coolers on high end cards are pretty poor. And Palit aren't renowned for awesome.

Still, I'd rather be worrying about 70c than me at 90c

And I can't OC my cards any more in TRi.

Yeah 70 is deffo better than 90 lol. I've used that new setting in EVGA Precision's fan control "temperature Hysteresis" and set it to 5 which seems to help a bit too.

 

[smarteyeball]

Haven't used it. May try it now. It sounds like a fan curve preset. I just use AfterBurner. Glad it helped you though.

 

[ganjiry]

Haven't used it. May try it now. It sounds like a fan curve preset. I just use AfterBurner. Glad it helped you though.

This explains temperature Hysteresis Possible ideas for future Afterburner functionality upgrades - Page 3 - Guru3D.com Forums

 

[ganjiry]

That temperature Hysteresis helps a fair bit. The plan was to set it to 5 and change my fan profile to a less aggressive one that will keep temps below 80c but it worked out better than planned. Max temps so far were 69c in BF3 and a max fan speed of 83%. So by using the temperature Hysteresis the fans are taking longer to spin down after a drop in temp meaning it cools quicker

 

[chromatica18]

 

[Dude]

Nice, you are on a roll

 

[chromatica18]

 

[chromatica18]

Nice, you are on a roll

Hehe.

 

[chromatica18]

New cards new scores.
Replaced the 2 msi r6970 lightnings with 2 evga gtx 760 acx/sc
Havn't overclocked them at all yet. Probably dont even need to. Core clock is 1058 and boost is 1124

 

[paulpicks21]

Very nice, those 760s look great. Fantastic scores

 

[Dude]

Those new 7 series cards look great!

 

[chromatica18]

Yes they are killer. Beat out a titan for half the price.