Sound crackling/popping

[Oispakaljaa]

Hello!
I have had this problem for quite a long time but I am getting enough from it.

Basicly nearly always when I start playing any sound source there is crackling in sound at begining. Happens usually with high frequenzy sounds, adjusting volume on youtube videos or click rewinding youtube video fast, also usually when I close video there that annoying sound occurs.
So basicly, always when someone talks in Mumble or I click to play video there is that annoying crackling/popping, it doesnt last long. Only when sound starts playing.



Here is some pictures you might find helpful

 

[linnemeyerhere]

First off welcome to SF. Second with sounds I would double check all your connections. Most often this is the pin making poor contact or even the beginning of a wire breaking down maybe from a bend or crimp. Then I would uninstall and reinstall the most current audio drivers and as well go to the mono mfgrs. site to check for other driver updates and lastly read to see if any bios updates deal with sound issues.

 

[Oispakaljaa]

I didnt remember to tell you that I recently build new computer except I use Graphics card and RAM from old computer, same problem exist with this.. I have tried two different headsets

 

[linnemeyerhere]

You're using audio outputs from Mobo or GPU card?

 

[JBmorris]

Do You also Receive lag During this problem too?

 

[Oispakaljaa]

You're using audio outputs from Mobo or GPU card?

Plugged to mobo, frontpanel audio/microphone outputs arent even connected to mobo

And about lag, do you mean system slowing? No nothing, no games run normally but that crackling occurs 90% of time when someone starts speaking in mumble/teamspeak

 

[linnemeyerhere]

I would start with making and unmaking the connections several times then if still happening then go to the driver re-install!

 

[Oispakaljaa]

I would start with making and unmaking the connections several times then if still happening then go to the driver re-install!

Okay, will check connections (do you mean ALL connections inside computer? strange I had same problem before building this computer and now only RAM exists from old setup) later this day or tomorrow. I have already installed real-tek drivers twice.

 

[linnemeyerhere]

No just the headphone/speaker connections and if this is a carry over then likely the issue is with the phone/speakers and it's cable.

 

[Oispakaljaa]

No just the headphone/speaker connections and if this is a carry over then likely the issue is with the phone/speakers and it's cable.

I have tried with two headsets,
Drivers should look fine?

 

[matts6887]

Another thing to consider trying is; completely uninstalling the sound card listed in system devices in the device manager; rebooting; letting windows re-detect and reinstall the drivers for the sound card; then go to the sound card manufacturers site and see if there are any updated drivers for your card and download and install them and see if that resolves the issue. Sometimes i believe what can happen is for one reason or another; something within windows will "Corrupt" the audio drivers which can possibly cause the issue you are having. Give this a shot and report back if it doesnt and we can try and go from there.

 

[Oispakaljaa]

Another thing to consider trying is; completely uninstalling the sound card listed in system devices in the device manager; rebooting; letting windows re-detect and reinstall the drivers for the sound card; then go to the sound card manufacturers site and see if there are any updated drivers for your card and download and install them and see if that resolves the issue. Sometimes i believe what can happen is for one reason or another; something within windows will "Corrupt" the audio drivers which can possibly cause the issue you are having. Give this a shot and report back if it doesnt and we can try and go from there.

I have tried both, deleting realtek drivers and let windows download them back, and also manually download from realtek website.

Here is two sound recordings. Using speakers, not headset and problem still exist.

In this video i turn volume completely off and then back on
https://www.youtube.com/watch?v=6d2pml7R3Uw&feature=youtu.be

In this video I only change volume, but i keep it on and wont turn off at all. Using some low sound and bass turned to low.
https://www.youtube.com/watch?v=0_BHh4Y3uE0&feature=youtu.be

It happens only when I am adjusting volume or start/stop video

 

[linnemeyerhere]

Try connecting your front panel audio and plugging into that with the headphones.

 

[Oispakaljaa]

Try connecting your front panel audio and plugging into that with the headphones.

Connected front panel audio to Mobo, exactly same thing there.

 

[linnemeyerhere]

OK well I'm out of suggestions unfortunately. Unless there's a resource or virus issue. Which is highly unlikely as you said this moved from the previous machine to this new rig with only those two components transferred....so I think it's one of those two components which is causing the issue.

 

[Oispakaljaa]

Strange, I tried my old computer (bought some cheap GPU and RAM) and it still has same crackling problem, and my new built system has it also? Also bought new GPU to this new computer, only RAM exists from old computer, but that shouldnt be the problem because got new ram for old computer and its still crackling.

What the hell.



What is that CPU throttling? how I can disable it?

 

[Oispakaljaa]

Ok made new test with latencymon when I was playing and using mumble
CONCLUSION
_________________________________________________________________________________________________________
Your system seems to have difficulty handling real-time audio and other tasks. You may experience drop outs, clicks or pops due to buffer underruns. One or more DPC routines that belong to a driver running in your system appear to be executing for too long. One problem may be related to power management, disable CPU throttling settings in Control Panel and BIOS setup. Check for BIOS updates.
LatencyMon has been analyzing your system for 0:06:18 (h:mm:ss) on all processors.


_________________________________________________________________________________________________________
SYSTEM INFORMATION
_________________________________________________________________________________________________________
Computer name: COMPU
OS version: Windows 8 , 6.2, build: 9200 (x64)
Hardware: ASRock, H97M Pro4
CPU: GenuineIntel Intel(R) Core(TM) i5-4590 CPU @ 3.30GHz
Logical processors: 4
Processor groups: 1
RAM: 8127 MB total


_________________________________________________________________________________________________________
CPU SPEED
_________________________________________________________________________________________________________
Reported CPU speed: 3299,0 MHz
Measured CPU speed: 3454,0 MHz (approx.)

Note: reported execution times may be calculated based on a fixed reported CPU speed. Disable variable speed settings like Intel Speed Step and AMD Cool N Quiet in the BIOS setup for more accurate results.


_________________________________________________________________________________________________________
MEASURED INTERRUPT TO USER PROCESS LATENCIES
_________________________________________________________________________________________________________
The interrupt to process latency reflects the measured interval that a usermode process needed to respond to a hardware request from the moment the interrupt service routine started execution. This includes the scheduling and execution of a DPC routine, the signaling of an event and the waking up of a usermode thread from an idle wait state in response to that event.

Highest measured interrupt to process latency (µs): 1383,111268
Average measured interrupt to process latency (µs): 3,409666

Highest measured interrupt to DPC latency (µs): 1366,970831
Average measured interrupt to DPC latency (µs): 0,857943


_________________________________________________________________________________________________________
REPORTED ISRs
_________________________________________________________________________________________________________
Interrupt service routines are routines installed by the OS and device drivers that execute in response to a hardware interrupt signal.

Highest ISR routine execution time (µs): 153,836617
Driver with highest ISR routine execution time: HDAudBus.sys - High Definition Audio Bus Driver, Microsoft Corporation

Highest reported total ISR routine time (%): 0,138836
Driver with highest ISR total time: dxgkrnl.sys - DirectX Graphics Kernel, Microsoft Corporation

Total time spent in ISRs (%) 0,188672

ISR count (execution time <250 µs): 397490
ISR count (execution time 250-500 µs): 0
ISR count (execution time 500-999 µs): 0
ISR count (execution time 1000-1999 µs): 0
ISR count (execution time 2000-3999 µs): 0
ISR count (execution time >=4000 µs): 0


_________________________________________________________________________________________________________
REPORTED DPCs
_________________________________________________________________________________________________________
DPC routines are part of the interrupt servicing dispatch mechanism and disable the possibility for a process to utilize the CPU while it is interrupted until the DPC has finished execution.

Highest DPC routine execution time (µs): 1405,975144
Driver with highest DPC routine execution time: nvlddmkm.sys - NVIDIA Windows Kernel Mode Driver, Version 340.43 , NVIDIA Corporation

Highest reported total DPC routine time (%): 0,081605
Driver with highest DPC total execution time: Wdf01000.sys - Suorituksenaikainen ydintilaohjainkehys, Microsoft Corporation

Total time spent in DPCs (%) 0,307362

DPC count (execution time <250 µs): 1840910
DPC count (execution time 250-500 µs): 0
DPC count (execution time 500-999 µs): 61
DPC count (execution time 1000-1999 µs): 4
DPC count (execution time 2000-3999 µs): 0
DPC count (execution time >=4000 µs): 0


_________________________________________________________________________________________________________
REPORTED HARD PAGEFAULTS
_________________________________________________________________________________________________________
Hard pagefaults are events that get triggered by making use of virtual memory that is not resident in RAM but backed by a memory mapped file on disk. The process of resolving the hard pagefault requires reading in the memory from disk while the process is interrupted and blocked from execution.

NOTE: some processes were hit by hard pagefaults. If these were programs producing audio, they are likely to interrupt the audio stream resulting in dropouts, clicks and pops. Check the Processes tab to see which programs were hit.

Process with highest pagefault count: arma3.exe

Total number of hard pagefaults 263
Hard pagefault count of hardest hit process: 84
Highest hard pagefault resolution time (µs): 1509260,805396
Total time spent in hard pagefaults (%): 0,440081
Number of processes hit: 14


_________________________________________________________________________________________________________
PER CPU DATA
_________________________________________________________________________________________________________
CPU 0 Interrupt cycle time (s): 12,153733
CPU 0 ISR highest execution time (µs): 153,836617
CPU 0 ISR total execution time (s): 2,854715
CPU 0 ISR count: 397490
CPU 0 DPC highest execution time (µs): 1405,975144
CPU 0 DPC total execution time (s): 4,020926
CPU 0 DPC count: 1603952
_________________________________________________________________________________________________________
CPU 1 Interrupt cycle time (s): 3,878882
CPU 1 ISR highest execution time (µs): 0,0
CPU 1 ISR total execution time (s): 0,0
CPU 1 ISR count: 0
CPU 1 DPC highest execution time (µs): 185,279782
CPU 1 DPC total execution time (s): 0,407372
CPU 1 DPC count: 138305
_________________________________________________________________________________________________________
CPU 2 Interrupt cycle time (s): 3,603882
CPU 2 ISR highest execution time (µs): 0,0
CPU 2 ISR total execution time (s): 0,0
CPU 2 ISR count: 0
CPU 2 DPC highest execution time (µs): 85,354047
CPU 2 DPC total execution time (s): 0,113766
CPU 2 DPC count: 51998
_________________________________________________________________________________________________________
CPU 3 Interrupt cycle time (s): 4,136180
CPU 3 ISR highest execution time (µs): 0,0
CPU 3 ISR total execution time (s): 0,0
CPU 3 ISR count: 0
CPU 3 DPC highest execution time (µs): 87,189148
CPU 3 DPC total execution time (s): 0,108514
CPU 3 DPC count: 46720