Suddenly lots of bsod in Win7, some help with debugging please?

[fluesopp]

The last bsod happen when the pc was idling, the rest when was playing.
Used the program SF Diag. tool

View attachment 75346

 

[CarlTR6]

You have some hardware issues. Three of the four dumps relate to your video driver.

I'll be back with more info. In the meantime, you might want to review these two threads.:

http://www.sevenforums.com/crashes-debugging/87372-memory-dump-problem-blue-screen-death-help.html

[2-Int] STOP 0x116: VIDEO_TDR_ERROR troubleshooting

 

[fluesopp]

Thank you for helping me
Will take my card out for some dust-cleaning, have cleaned the fans 2 times...but i think its dust inside to
But havent had any problems with the temps, have pretty good control on them since i love to have the hardware cold as possible.

Have tried 3 drivers now, and bsod on every one

 

[Capt.Jack Sparrow]

Hello !!

As Carl suggested it's an issue with your ATI Display card Driver. So first remove the ATI Drivers completely and Turn Off Automatic Driver Installation. Follow this Link http://www.sevenforums.com/tutorials/82137-drivers-turn-off-automatic-driver-installation.html then download a fresh copy of Drivers from ATI's website and install it. Lets see if that fixes the issue.

Try this free video stress test: FurMark: Graphics Card Stability and Stress Test, OpenGL Benchmark and GPU Temperature | oZone3D.Net to make sure your Card is in good condition.

FurMark Setup:
- If you have more than one GPU, select Multi-GPU during setup
- In the Run mode box, select "Stability Test" and "Log GPU Temperature"
Click "Go" to start the test
- Run the test until the GPU temperature maxes out - or until you start having problems (whichever comes first).
- Click "Quit" to exit

Also there is a Service expection that has happened most caused by a Firewall / Antivirus so i would suggested to disable or Uninstall it and see if that take care of the problem. Also one of the crash happend with your USB Driver.

Bugcheck:

Built by: 7600.16539.amd64fre.win7_gdr.100226-1909
Debug session time: Fri May 28 00:22:48.641 2010 (GMT+6)
System Uptime: 0 days 0:02:15.029
BUGCHECK_STR:  0x1E
KMODE_EXCEPTION_NOT_HANDLED (1e)
IMAGE_NAME:  USBPORT.SYS
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Built by: 7600.16539.amd64fre.win7_gdr.100226-1909
Debug session time: Fri May 28 00:19:59.608 2010 (GMT+6)
System Uptime: 0 days 2:30:08.607
BUGCHECK_STR:  0x3B
SYSTEM_SERVICE_EXCEPTION (3b)
IMAGE_NAME:  atikmdag.sys
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Built by: 7600.16539.amd64fre.win7_gdr.100226-1909
Debug session time: Sat May 22 03:11:46.884 2010 (GMT+6)
System Uptime: 0 days 6:35:28.288
BUGCHECK_STR:  0x3B
SYSTEM_SERVICE_EXCEPTION (3b)
IMAGE_NAME:  atikmdag.sys
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Built by: 7600.16539.amd64fre.win7_gdr.100226-1909
Debug session time: Thu May 27 00:34:05.510 2010 (GMT+5)
System Uptime: 0 days 0:14:02.897
BUGCHECK_STR:  0x7E
SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M (1000007e)
IMAGE_NAME:  atikmdag.sys
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Hope this helps,
Captain

 

[CarlTR6]

Three of your dumps report atikmdag.sys, your ATI video card driver as a possible cause of the BSOD.

STOP 0x0000003B: SYSTEM_SERVICE_EXCEPTION

Usual causes: System service, Device driver, graphics driver, ?memory

The fourth dump reports USBPORT.SYS as a probable cause.

STOP 0x0000001E: KMODE_EXCEPTION_NOT_HANDLED

Usual causes: Device driver, hardware, System service, compatibility, Remote control programs, memory, BIOS

*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 3B, {c0000005, fffff88004d7b635, fffff8800c4a07f0, 0}

Unable to load image atikmdag.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for atikmdag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmdag.sys
*** WARNING: Unable to verify timestamp for atikmpag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmpag.sys
Probably caused by : [COLOR=Red][B]atikmdag.sys[/B][/COLOR] ( atikmdag+343635 )

Followup: MachineOwner


*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1E, {0, 0, 0, 0}

Probably caused by : [COLOR=Red][B]USBPORT.SYS[/B][/COLOR] ( USBPORT!USBPORT_EndpointFromHandle+6 )

Followup: MachineOwner

Lets do a memory check. If you have done any overclocking of the CPU of the graphics card, revert to stock.

Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder. Boot from the CD, and leave it running for at least 5 passes. Post back with your results.

Edited to add: Captain Jack types faster than I do!

 

[fluesopp]

Thank you both
Will do the testing and try some other drivers , will post the result i get from it.

 

[CarlTR6]

Good luck!

 

[fluesopp]

Thank you..hehe
Had it with the last motherboard to but solved it, so i hope it will do this time to.
Have to think positive about this, you learn about your pc