System lock

[cwhite]

System locks and I get just a Kernel_power Event code: 41 and bugcheck 0 if I look in Event viewer.

I check memtest86 and scanned HD everything was ok.

New Gigybyte GA-990FXA-UD3

New FX-6350 unlocked 3.0 rev I've Updated Bios

windows 7-64 home


Thanks for any help.

 

[x BlueRobot]

Please follow - http://www.sevenforums.com/bsod-help-support/96879-blue-screen-death-bsod-posting-instructions.html

 

[cwhite]

I updated the Diagnostic file; I hope that's what you were referring to.

 

[x BlueRobot]

Thanks

Run Driver Verifier to scan for any corrupted drivers which may be causing problems, this program works by running various stress tests on drivers, in order to produce a BSOD which will locate the driver; run for least 24 hours:

• http://www.sevenforums.com/tutorials/101379-driver-verifier-enable-disable.html

   Information

Additional Help - http://www.sevenforums.com/crash-lo...-driver-verifier-identify-issues-drivers.html

How many passes did you run MemTest86+ for? What hard drive diagnostics did you run?

 

[cwhite]

I did 6 passes with memtest and ran windows HD error checker. About 20 minutes ago I did a restart and it said Bios was corrupted and reverted back to the old Bios.

 

[x BlueRobot]

6 passes isn't enough, and what do you mean by reverted to the old BIOS? Did you flash the BIOS again?

 

[cwhite]

How many times do you recommended? And my mobo has dual bios so it went back to the original before I updated.

 

[x BlueRobot]

I would recommend least 9-10 passes to give adequate testing, since pass performs a different number of tests.

 

[cwhite]

Overnight apparently I got a BSOD and I got a dump file.

 

[cwhite]

This is the first dump file my computer has giving me. I would be grateful if someone could please help me with it.

 

[x BlueRobot]

[COLOR=Red]BugCheck 9F[/COLOR], {[COLOR=Blue]3[/COLOR], [COLOR=Orange]fffffa8006ae6060[/COLOR], fffff80000b9c3d8, [COLOR=SeaGreen]fffffa800934dd10[/COLOR]}

*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : [COLOR=Red]nvlddmkm.sys[/COLOR]

The bugcheck indicates that the device object has been holding a power-related IRP for too long.

0: kd> [COLOR=SeaGreen]!irp fffffa800934dd10[/COLOR]
Irp is active with 3 stacks 2 is current (= 0xfffffa800934de28)
 No Mdl: No System Buffer: Thread 00000000:  Irp stack trace.  
     cmd  flg cl Device   File     Completion-Context
 [  0, 0]   0  0 00000000 00000000 00000000-00000000    

            Args: 00000000 00000000 00000000 00000000
[COLOR=Red]>[ 16, 2]   0 e1 fffffa8008273480 00000000 00000000-00000000    pending
           \Driver\nvlddmkm[/COLOR]
            Args: 00016600 00000001 00000004 00000006
 [  0, 0]   0  0 00000000 00000000 00000000-fffffa8009143160    

            Args: 00000000 00000000 00000000 00000000

0: kd> [COLOR=Orange][COLOR="SeaGreen"]!devobj fffffa8008273480 f[/COLOR][/COLOR]
fffff80003282fb0: Unable to get value of ObpRootDirectoryObject
Device object (fffffa8008273480) is for:
 InfoMask field not found for _OBJECT_HEADER at fffffa8008273450
 \Driver\nvlddmkm DriverObject fffffa8008002620
Current Irp 00000000 RefCount 0 Type 00000023 Flags 00002004
DevExt fffffa80082735d0 DevObjExt fffffa8008273f88 
Characteristics (0x00000100)  FILE_DEVICE_SECURE_OPEN
Device queue is not busy.

----------------------------------------------------------------------------

0: kd>[COLOR=SeaGreen] lmvm nvlddmkm[/COLOR]
start             end                 module name
fffff880`056bb000 fffff880`061a0000   nvlddmkm T (no symbols)           
    Loaded symbol image file: nvlddmkm.sys
    Image path: nvlddmkm.sys
    Image name: nvlddmkm.sys
    Timestamp:        [COLOR=Red]Fri Jun 21 10:06:16 2013[/COLOR] (51C41788)
    CheckSum:         00AB87FF
    ImageSize:        00AE5000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4

Please update your nVidia graphics card driver, to the latest WHQL version, following this method:

• NVIDIA Driver Downloads - Advanced Search

Version: 320.49
Release Date for Desktops and Notebooks : July 1st 2013
In Device Manager: 9.18.13.2049

1. Start rb: Type: Device Manager
2. Expand Display Adapters
3. Right-Click Driver Name, Uninstall
4. Reboot
5. Run Driver Sweeper
6. Reboot
7. Install Downloaded Driver

Driver Sweeper will scan for any left over files from the old driver, old driver files can cause conflicts with new driver installations. Create a System Restore point beforehand, in case any problems or issues arise.

Driver Sweeper:

• http://www.sevenforums.com/tutorials/83814-drivers-clean-left-over-files-after-uninstalling.html