Transmit speed is low in N standard wireless

[Gil]

Hi all.
Thanks for all the people who are helping me out in my other posts.
I've noticed that transmit speed it lower then 300Mbps in my N standard wireless network.
Here is a screenshot that I hope will shed some light. I would like to get the maximum out of my wireless network so if you guys need any more info please let me know.



Thanks.
Gil

 

[not so gray matter]

I'm assuming you have the latest drivers for your wireless card and your router's firmware has been updated.

A Wireless N network won't actually run at it's peak speed because it needs to reserve some of the bandwidth. Your signal strength isn't 100%, I'd try to improve that and see if it increases the speeds.

 

[pebbly]

the maximum theoretical speed is 270mbs ,your speeds are better than average i personally would'nt start poking about you could end up making matters worse

 

[Gil]

but can you see that the transmit speed is at 150Mbps?
Shouldn't it be over 200Mpbs at least? This is taken from my computer which uses a USB wireless adapter in N standard. i use WPA2-PSK + WEP for N standard.

My router is configured to work on AP mode, is that ok?
Also I have paremeters such as, Data rate and N data rate set to auto, should I set them on something else?

 

[logicearth]

There is nothing wrong with the current speed you are getting.
Leave well enough alone is my suggestion.

 

[captainpacific]

I agree - leave alone. Typically these N routers will receive at up to 270Mbps and transmit at half that rate. They just publish the higher rate in the sales pitch.

 

[Desslok]

How far are you from the router?