Twinhan driver

[falcon eyes]

Plsa
I have twinhan 1025 satellite card it works fine on W7-x32 but when migrate to W7-x64 it won't work due to windows driver signature
could some one help to find a driver for TwinHan 1025 compatible with W7-x64
(by the way i checked twinhan web site and found nothing)

 

[Lomai]

Hi falcon eyes


Have you tried running the legacy drivers under compatibility mode?
X-64 is, by default, very stringent against the use of unsigned drivers.
Can you try running it in compatibility mode?
If that does not work, extract the existing driver file to a folder> Go to Device Manager>and try to upgrade the driver from there

Hope this helps

 

[falcon eyes]

I did all that but it fails

 

[thefabe]

Welcome to Seven Forums you might want to give this thread a read about turning off driver signing. However I think your problem is more that your trying to use a 32 bit driver on a 64 bit system, so I would try and find a 64 bit version of the driver. anyways here is the thread post #2 http://www.sevenforums.com/graphic-cards/3386-resolution-problem-intel-915-a.html Fabe

 

[falcon eyes]

pls do any body have a X-64 Twinhan 1025 driver

 

[Lomai]

Hi falcon

Have you tried this link ?

 

[falcon eyes]

Yes i tried the 1.2.3.8BDA driver and its define the card and catch a signal(signal indicator 66%,Quality 57%) but when scanning for channels it didn't catch any channels
and when using pre-made file channel there's no video or sound even though the codecs is installed and i'm using altdvb starIII edtion,and the same result with ProgDVB

 

[medorpg]

Guys I'm like this person, any solution yet ?
The problem is with RAM
the driver is working with RAM less than 4 GB
(I checked by making windows boots with 4GB RAM option in msconfig)
after making RAM 4 GB everything works great

any solution for that ?