Upgrade from Vista to 7 Ult bad drivers no safe mode

[Huludrock]

So I upgraded an HP Pavilion Dv6000 from Vista to 7 ult and a drivver issue is now not allowing me to even get into safe mode. The blue screens I get are 1: An attempt to write to non executable memory was made and 2: driver irql less than 3: an attempt was made to write to read only memory

Can I recover somehow?



Help!

 

[VistaKing]

So we could help you with your bsod issue . Please take a look at the link below

:ar:http://www.sevenforums.com/bsod-help-support/96879-blue-screen-death-bsod-posting-instructions.html

Can you give us the serial number for the laptop HP Pavilion Dv6000

To get the serial number :

:ar: http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c00033108
or give us the entire model number of the laptop

This is for the drivers .

 

[Huludrock]

As for the blue screen bump files I cant even boot into any safe mode. I will grab a picture and post that real quick. The serial is cnf8313nn2

 

[VistaKing]

There are no Windows 7 drivers for your laptop but you may use the Vista Drivers

:ar: Software & Driver Downloads HP Pavilion dv6700t CTO Special Edition Entertainment Notebook PC | HP® Support

 

[Huludrock]

New Development, after many unsuccessful safe mode, low video resolution, last good known, etc. i tried last known good again to get a picture of a blue screen and it started configuring windows updates........then a blue screen. Then i restarted and tried safe mode and it reverted the updates, tried to start windows in safe mode then low resolution and gave me these blue screens that I have attached. The memory blue screens have stopped happening though oddly enough.

 

[Huludrock]

How will I recover my system and install drivers without being able to boot into any safe mode at all?

 

[VistaKing]

Looking at the images. The BSOD points to a driver. Did you recently install any drivers?

Lets look at the memory as well . Look at the link below

:ar: http://www.sevenforums.com/tutorials/105647-ram-test-memtest86.html

   Note

The program will require a USB flash drive . It will wipe everything on the flash drive so please back up the contents of the FLASH drive before running the tool

:Added:

How will I recover my system and install drivers without being able to boot into any safe mode at all?

Do you have a Windows 7 Installation Disc? We could do a System Restore from the System Recovery

:ar: http://www.sevenforums.com/tutorials/700-system-restore.html

Do this step:

OPTION TWO

To Do a System Restore at Boot using System Recovery Options

 

[Huludrock]

I tested the memory and yes When I performed the upgrade from Vista to 7 drivers were automatically reinstalled by windows during updates. My problem is that I cannot boot into any safe mode so once again pretty much anything you tell me to do involving a working windows installation isn't going to happen.

 

[VistaKing]

Look at the tutorial I posted above your statement. I was editing my post when you answered.

 

[Huludrock]

System restore failed every single time I tried it no matter from what media I tried it from.

 

[Huludrock]

I saw it after responding sorry.

 

[Huludrock]

crazy huh?

 

[VistaKing]

See if you could do a System Repair from the System Recovery window using a Installation disc or a Repair disc

 

[Huludrock]

I've literally tried everything on the DVD including all bootrec.exe commands

 

[VistaKing]

You get a BSOD when you use the disc ?

 

[Huludrock]

startup repair doesn't work, system restore doesn't work, I can use the DVD but nothing on it solves the problem.

 

[Huludrock]

Wait.....should I use the installation DVD and load drivers? What then if anything?

 

[Huludrock]

Oh...My...God....Run driver verifier from the DVD CMD......Let's see what happens

 

[VistaKing]

What is happening ?

 

[Huludrock]

didn't work. I really don't want to reformat. I am trying to figure out how to get my win 7 installation to "install new hardware" from within mini xp off of hirens boot cd.